Z-Lite 2102F3 Three Light Flush Mount Instruction Manual

Z-Lite 2102F3 Three Light Flush Mount

Specifications

• Product: Flush Mount Fixture
• Installation: Indoor use only
• Power Source: Electric
• Bulb Compatibility: Check the recommended maximum capacity

Pre-Installation Steps
Before installation, ensure the main power at the circuit breaker is turned off to prevent electric shock.

Assembly and Installation

1. Thread the Nipple with Hex Nut to the Connector.
2. Place the Glass, Rubber washer, Flat washer, then screw the Hex nut.
3. Attach the Cap to the fixture then secure with the Finial.
4. Secure the Mounting bracket with the Mounting screw to the Outlet box.
5. Pull out the outlet wire and ground wire from the Outlet box and make wire connections as instructed.
6. Attach the fixture pan against the Outlet box, and secure it with the Mounting screw.
7. Install bulbs (bulbs not included).

Completion
Ensure all connections are secure and bulbs are installed properly before turning on the power.

FAQ
Q: Are bulbs included with the Flush Mount Fixture?
A: No, bulbs are not included. Please purchase compatible bulbs] separately.

FLUSH MOUNT FIXTURE

INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions, as you may need them at a later date.

CAUTION
WARNING: Risk of Fire. Consult a qualified electrician to ensure the correct branch circuit conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.

GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.

ASSEMBLY AND INSTALLATION

1. Thread the Nipple(12) with Hex Nut to the Connector(11).
2. Place the Glass(18),Rubber washer(13),Flat washer(14),then screw the Hex nut(15).
3. Attach the Cap(16) to the fixture then secure with the Finial(17)
4. Secure the Mounting bracket(6) with Mounting screw(8) to the Outlet box(1).
5. Pull out the outlet wire and ground wire from the Outlet box(1). Make wire connections
   • Ribbed wire(w/o marking) from light to White wire(2) from the power source. –Smooth wire(w/o marking) from light to Black wire(3) from power source. –Loop the Ground wire(4) to Mounting bracket(6) with a Green screw(10)
6. Attach the fixture pan against the Outlet box(1), and secure it with the Mounting screw(9)(Check the Mounting bracket(6) against the fixture KEYHOLE SLOTS to ensure the proper fit)
7. install bulbs:(bulbs not include)

(Please don’t exceed the maximum capacity that is recommended on the sockets).

INSTALLATION IS NOW COMPLETED

1. OUTLET BOX
2. WHITE WIRE
3. BLACK WIRE
4. GROUND WIRE
5. WIRE CONNECTOR
6. MOUNTING BRACKET
7. HEX NUT
8. SCREW
9. MOUNTING SCREW
10. GROUND WIRE SCREW
11. CONNECTOR
12. NIPPLE
13. RUBBER WASHER
14. LAT WASHER
15. HEX NUT
16. CAP
17. FINIAL
18. GLASS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>