behringer BDI21 V-Tone Bass Driver DI Pedal Instruction Manual
- August 18, 2024
- Behringer
Table of Contents
behringer BDI21 V-Tone Bass Driver DI Pedal
Thank you for showing your confidence in us by purchasing the V-TONE BASS
BDI21. This high-quality bass driver is designed for bassists with diverse and
wide-ranging needs. The integrated tube emulation produces the sound and
response of a miked bass tube amp while the 2-band EQ (with presence control)
and the dedicated drive control let you create any bass tone you desire, from
vintage to modern.
In addition, the BDI21 functions as a standard ultra-transparent direct
injection box when used in bypass mode.
A DI (Direct Injection) box allows you to send a signal directly from an
unbalanced, high-impedance output (like a bass guitar) and connect it directly
to the balanced mic input of a mixing console.
Whether for stage, recording, rehearsal or warm-up, the Behringer V-TONE BASS
BDI21 is a natural choice for those who are seeking great tone with a simple
set-up.
Control Elements
- The DRIVE control adjusts the overall amount of gain and overdrive, similar to pushing the output section of a tube amp.
- The TREBLE control governs the high-frequency range of the signal (±12 dB).
- The BASS control allows you to boost/cut the low-frequency range (±12 dB).
- The PRESENCE control boosts the upper harmonic content for a smoother high end and more attack.
- The LEVEL control adjusts the output level of the BDI21.
- The BLEND control adjusts the amount of tube emulation. The tube emulation circuitry provides the real tube sound of a miked bass tube amp.
- When activated, the GND LIFT disconnects the ground connection between input and output. Depending on the grounding of the connected equipment, this can eliminate hum or ground loops.
- Use the footswitch to activate/deactivate all the tone functions (EQ, DRIVE, tube emulation). When deactivated, the BDI21 functions solely as a standard transparent DI box.
- This LED illuminates when the effect is activated (see (8)). Connectors
- Use this ¼” TS INPUT connector to plug in the instrument cable of your bass guitar or other instruments.
- BAL OUT is the BDI21’s balanced mic level output. Use a high-quality, balanced XLR (microphone) cable to connect the driver to a mixing console.
- The unbalanced ¼” TS OUT connector sends the signal to your bass amp. Bottom of the BDI21
- SERIAL NUMBER. The serial number of the BDI21 is located at the bottom.
- BATTERY COMPARTMENT. Open the lid to install or replace the 9 V battery.
The BDI21 is powered as soon you insert a plug into the INPUT. The battery is “disconnected” when the plug is removed. For this reason, the BDI21 has no on/off switch. To prolong battery life, always disconnect the input when the driver is not in use.
Power supply connector
15 Use the DC IN connection to plug in a 9 V power supply (not included).
Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualified servicing personnel for servicing or repairs, especially when power
supply cord or plug is damaged.
Warranty
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s Limited Warranty, please see complete details online
at
community.musictribe.com/pages/support#warranty
Sample Settings
Specifications
Input
- Connector ¼” TS
- Impedance 1 MΩ
Output
- Connector ¼” TS
- Impedance 1 kΩ
Balanced output
- Connector XLR
- Impedance 200 Ω
- Power supply 9 V, >50 mA DC regulated
- Power connector 2 mm DC jack, negative center
- Battery 9 V type 6LR61
- Power consumption 25 mA
Dimensions/Weight
-
Dimensions (H x W x D) approx. 5 x 3 9/10 x 2″
approx. 127 x 100 x 50 mm -
Weight approx. 1.01 lbs / 0.46 kg
Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
WARNING
- As with all small batteries, the batteries used with this product should be kept away from small children who still put things in their mouths. If they are swallowed, promptly call your local poison control center.
- Always purchase the correct size and grade of battery most suitable for intended use.
- Replace all batteries of a set at the same time.
- Clean the battery contacts and also those of the device prior to battery installation.
- Ensure the batteries are installed correctly with the regard to polarity (+ and -).
- Always remove battery if consumed or if product is to be left unused for a long time.
- Replacement of a battery with an incorrect type that can defeat a safeguard! Replace only with the same or equivalent type!
- Risk of fire or explosion if the battery is replaced by an incorrect type.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- Attention should be drawn to the environmental aspects of battery disposal
Safety Instruction
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Use only attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
- Do not install in a confined space, such as a book case or similar unit.
- Do not place naked flame sources, such as lighted candles, on the apparatus.
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2022 All rights reserved.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Behringer
V-TONE BASS DRIVER DI BDI21
Responsible Party Name: Music Tribe
Commercial NV Inc.
Address : 122 E. 42nd St.1,
8th Floor NY,
NY 10168,
United States
Email Address: legal@musictribe.com
V-TONE BASS DRIVER DI BDI21
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with Directive
2014/30/EU,
Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU,
Regulation 519/2012
REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S Address: Gammel Strand 44,
DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd. Address: 6 Lloyds Avenue,
Unit 4CL London EC3N 3AX, United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>