EENOUR 2350 BTU Portable Air Condition Instruction Manual

EENOUR 2350 BTU Portable Air Condition

Introduction

Thank you for choosing EENOUR! PLEASE READ BEFORE USE THIS PRODUCT.
If you have a question or experience a problem with your EENOUR purchase, contact us support@eenour.com to speak with an agent.
SAVE THIS MANUAL FOR FUTURE REFERENCE.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

1. This product is not suitable for people with weak physical, sensory or mental abilities (including children), unless under the supervision or guidance of a competent person.
2. This product should not be used as a toy. Children should pay close attention to it when using it.
3. This product is only suitable for dry place, do not use on wet surface.
4. Do not touch the plug or other parts with wet hands.
5. Do not use when the power cord or plug is damaged. Replacement must be completed by professionals to avoid hazards.
6. If the equipment doesn’t work, please don’t disassemble it by yourself, please contact us at support@eenour.com for solutions.
7. Do not put fingers or sticky material into the air outlet or cooling outlet.
8. Please use and replace accessories according to the manufacturer’s instructions.
9. Even if the equipment is seriously damaged, do not burn, the compressor may explode in the fire.

MAIN PARTS AND COMPONENTS

1. Control Panel
2. Cooling Air Outlet
3. Handle
4. Condenser Air Inlet
5. Evaporator Air inlet
6. Air Exhaust
7. Power Outlet
8. Condensation Drain

Hot Air Exhaust Hose Connector|
---|---
Cold Air Outlet Hose Connector|
Exhaust Duct (big)|
Air Duct (small)|

Adapter|
Drain Hose|
24V DC Power Cable|

INSTALLATION GUIDE LOCATION

1. The air conditioner should be placed on a firm floor and dry place to minimize noise and vibration.
2. For safe and secure positioning, place the unit on a smooth, level floor strong enough to support the unit.
3. Allow more than 20 inches of space around the unit for efficient air-conditioning.
4. Never place any obstacles around the air inlet or outlet of the unit.

POWER SUPPLY CONNECTION

1. Insert the power adapter into the socket at the rear of the air conditioner, then the power indicator will be light up.

• Attention: the plug-in bump on the power socket corresponds to the adapter plug 2. Considering the various uses of the portable air conditioner, in addition to the adapter that can be used for our large power supply equipment, such as generators and power stations, we also have provided an additional power cable which can be used for DIY your outdoor battery, RV power supply, etc.
• Attention: the power cable must be used for DC 24V standard, at least 1 OA current supply.

Caution:
If you do not use the product for a long time, unplug the AC adapter from the outlet. Please do not use the power cord in wound or jumbled, to avoid the cord heats up and fires. Please make sure to use it in stretched .

INSTALLATION AND OPERATION

A. Put the air conditioner inside the tent and exhaust hot air.

1. Insert the exhaust duct into the hot air exhaust hose connector and turn it counterclockwise until it stops to fix it. (see Fig 1)
2. Screw the end of threaded hot air exhaust hose connector into the exhaust port, then turn it right until it stops to fix it. (When disconnect the exhaust duct from the portable air conditioner, turn it left then pull it out.) (see Fig 2)
3. Put the outlet of the exhaust duct outside of the tent to exhaust the hot air. (see Fig 3)

B. Put the cooling air outlet inside the tent

1. Let the condenser air inlet and exhaust ports outside the tent.

C. Put the air conditioner outside the tent and cooling air blow into the tent

1. Insert the small air duct into the cold air outlet hose connector and turn it counterclockwise to fix it. (see Fig 4)
2.  Connect the cold air outlet hose connector with the cooling air outlet, then fix it . (see Fig 5)
3. After connecting the small air duct to the air conditioner, insert it into the tent. (see Fig 6)

Attention:

1. Allow more than 20 inches of space around the unit for efficient air-conditioning.
2. Keep the hose straighten as much as possible, the hose length is designed, please do not connect it with other hoses which will cause fault.

DRAIN HOSE CONNECTION
Insert the drain hose into the hole at the back of the air conditioner. and avoid the drain hose clogging, keep it straighten as much as possible .

CONTROL PANEL

• Power ON/OFF
• Fan Speed Selection Button (LOW/MED/HIGH)
• Sleep Mode (Only start ventilation function)
• Increase /Decrease Temp Button(60 F-86 F)

OPERATION INSTRUCTIONS

1. Press and hold the (j) for 2 seconds to turn on, and then press the (j)2 seconds to turn off.
2.  If there is no operations after startup, the screen will display the current air outlet temperature, speed and mode.
3. When the air conditioner is turned on, it will automatically switch the cooling mode and the icon will be indicates on the screen. Then press sleep mode button to select fan mode and the icon will disappear. Press the sleep mode button to switch between fan mode and cooling mode.
4. Press the buttons until the desired temperature is displayed. The temperature digital flashing indicates that the setting is in progress. If you press the continuously, you can quickly and continuously press the button increase or decrease. After stop pressing the button, the temperature digital flashing stops for 5 seconds, and automatically exits the setting and restores the display of the actual outlet temperature. When the outlet temperature drops to the set value, the system will automatically reduce the cooling capacity and power consumption to save energy. When the temperature rises up, turbo will be resumed.
5. Press the to adjust and set the desired speed. The speed icon flashes indicate that it is setting. The 3 level fan speed can be set. After stop the setting, the flashing will stop for 5 seconds, then the setting is completed. 

CARE INSTRUCTIONS

1. Before cleaning or maintenance, turn the appliance off. Wait for a few minutes then unplug from the electrical outlet.
2. Clean the appliance with a slightly damp cloth then dry with a dry cloth.
3. Plastic parts maintenance:
   • To protect the air conditioner, it must be kept clean, and try to avoid oil stain and deformation. If the oil is attached to the plastic parts for a long time, the plastic parts will be aging, cracking and smell. Therefore, we should clean it regularly.
   • Never wash the air conditioner with water to prevent the electrical insulation from reducing and rusting.
   • Never use petrol, alcohol or solvents to clean the appliance.
   • Never spray insecticide liquids or similar .

Specification

EXCLUSIONS

This warranty does not apply to the below:

1. If the appearance or exterior of the product has been damaged or defaced, altered or modified in design or construction.
2. If there is damaged due to power line surge, user damage to the AC power cord or connection to improper voltage source.
3. If damage is due to general misuse, accidents or acts of God.
4. If repair attempts are done by unauthorized service agents, use of parts other than genuine parts or parts obtained from persons other than authorized service companies.
5. On products that have been purchased as refurbished, like new, second-hand, in a “As-ls” or “Final Sale” terms.
6. To products used in settings other than ordinary household use or used other than in accordance with the provided instructions.
7. To damages for service calls for improper installations.
8. Due to fire, earthquake, storm and flood damage, lightning strike, other natural disasters, pollution, abnormal voltage, and other external factors.
9. If any failure or damage occurs, please stop using it. If you continue to use it, it will smoke or ignite. In some cases, we are not responsible for any damage caused by fire.

CUSTOMER SERVICE

IMPORTANT

1. The warranty commences the day the product is purchased and covers up to a period of 1 year (12 months).
2. The specifications of this product are subject to change without notice.
3. This product may be discontinued due to the discontinuation of electronic components.
4. If you have a problem with this product, please contact the Customer Satisfaction Center at support@eenour.com . DATED PROOF OF PURCHASE, MODEL# ORDER ID. We’ll get back to you as soon as possible. Thank you so much!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>