DELTACO ARM-1153 Tiltable TV Wall Mount User Manual
- June 12, 2024
- DELTACO
Table of Contents
DELTACO ARM-1153 Tiltable TV Wall Mount
Product Information
The ARM-1153 is a tiltable TV wall mount designed for indoor use only. It can support a maximum weight of 150mm and is compatible with TVs that have a VESA pattern within the range of 425mm (min) to 70mm (max) and 448mm (min) to 75mm (max). The product can be installed on wooden stud walls, solid concrete walls, or brick walls.
Product Usage Instructions
- Read the entire instruction manual before starting installation and assembly. If you have any questions, contact your retailer for assistance.
- Make sure the supporting surface can safely support the combined weight of the equipment and all attached hardware and components.
- Use safety gear and proper tools during installation.
- Check that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact Deltaco or the retailer where you purchased the product.
- Do not exceed the marked max weight capacity.
- Install the product according to the instructions provided. Improper installation may result in serious injury.
- Use the mounting screws provided and do not over tighten them.
- Check that the wall mount is secure and safe to use at regular intervals (at least every three months).
- The product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
DIMENSION
BOX CONTENT
INSTALLATION INSTRUCTION
SAFETY INSTRUCTION
- Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your retailer for assistance.
- Caution: Usage together with products heavier than the rated weight may result in instability which can cause possible injury.
- Wall mounts must be attached as specified in assembly instructions. Improper installation may result in serious injury.
- Safety gear and proper tools must be used. This product
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- This product is designed to be installed on wooden stud walls, solid concrete walls or brick walls.
- Use the mounting screws provided and do not over tighten the mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Important: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact Deltaco or the retailer where you purchased the product.
- Caution: Do not exceed the marked max weight. Serious injury or property damage may occur!
- Check that the wall mount is secure and safe to use, at regular intervals (at least every three months).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>