fender RIFF Bluetooth Speaker User Manual
- October 30, 2023
- fender
Table of Contents
fender RIFF Bluetooth Speaker User Manual
WHAT’S IN THE BOX
- RIFF Bluetooth speaker RIFF
- USB-C cable USB Type C
TURNING ON / OFF
Press the power button on the back of the unit to turn on and off.
BLUETOOTH PAIRING
Tap the Bluetooth button on the top panel to activate pairing. Bluetooth
symbol will blink blue.
On your Bluetooth audio device, go to Bluetooth settings and select “Fender
RIFF “. Once connected, the Bluetooth LED will turn remain solid blue.
PARTY MODE
Agent (Broadcast) unit: Tap the Link symbol on the top panel to activate party
mode. Agent():
Client (Receiver) unit: Turn on the unit, then touch and hold the link symbol
on the top panel for 3 seconds. Client(): 3b
If pairing more than 1 Client to Agent unit, continue to connect all Client
units to Agent unit before starting audio streaming to Agent unit.
An audio cue will play when Agent and Client unit(s) are successfully
connected. To exit party mode; Unlink all – Touch and hold the Link symbol on
Agent unit for 2 seconds. Unlike client Touch and hold the Link symbol on
the client unit to unlink for 2 seconds.
Agent client client
VOLUME CONTROL
To increase volume, slide finger across touch panel to the right, or tap the +
symbol. An audio cue will be played when the max level is reached. : “+”
To decrease volume, slide finger across touch panel to the left, or tap the –
symbol. An audio cue will be played when the min level isreached. : “-”
EQ CONTROL ( BASS / TREBLE )
To increase Bass / Treble EQ, slide finger across touch panel to the right, or
tap the + symbol. An audio cue will be played when the max level is reached. /
To decrease Bass / Treble EQ, slide finger across touch panel to the left, or
tap the – symbol. An audio cue will be played when the min level is reached. /
To reset Bass / Treble to middle, touch and hold the Treble or Bass words for
5 seconds. a An audio cue will be played when successful.
GUITAR MODE
STANDARD You can play your guitar through the RIFF with a standard guitar cable (3/4″ plug).
HIGH GAIN If your guitar volume is too low (i.e. if your guitar is passive),
touch and hold “Volume” for 5 seconds to activate high gain mode. “Volume”
high gain
Touch and hold “Volume” for 5 seconds to exit high gain mode. “Volume” high
gain
PLAYING ALONG WITH MUSIC
Jam along with your tunes easily; with your guitar plugged in, you can pair
with your Bluetooth device as per normal. Volume of the Bluetooth signal (e.g.
music) is controlled via the Bluetooth device. Guitar volume is controlled via
the RIFF touch panel. () RIFF
CHARGING
You can charge the RIFF via the USB C port at the back of the unit. USB Type CRIFF
VOICE CALLS
RIFF has built-in microphones that allows it to function as a speakerphone.
MULTI – POINT
Tap the Bluetooth button to connect with first source. Tap the Bluetooth button again to connect with the second source. Both sources are now connect to the RIFF.
AUTO – EQ ( ROOM CORRECTION )
To begin the Auto-EQ please launch the Riff app and select the Auto-EQ
function.
Step 1: Hold your device with the mic pointing directly at the speaker, about
12 in (30 cm) from the front of the speaker and tap the Start Tuning button.
12(30) “Start Tuning”
Step 2: Once step 1 is complete, go to your usual listening position, hold the
device with the mic pointing to the speaker and tap the Start Tuning button
again. ” Start Tuning”
Step 3: Tuning is now complete and the app will ask you to select your preferred Bass and Treble EQ profile. Once selected, the Auto-EQ process is complete. (APP) (EQ profile)
RIFF APP
The RIFF app has these functions:
- Tone adjustment – slide to adjust Volume, Treble and Bass levels.
- Guitar mix adjustment – slide to adjust balance of volume between Guitar and Bluetooth signals.
- Auto-EQ Auto adjusts the overall EQ of the RIFF to suit the acoustics of the room that it is placed in.
Important safety instructions
The applied nameplate is located at the bottom or near of the product. to avoid replacement of a battery with an incorrect type don’t disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a Battery. don’t leaving a battery in an extremely high temperature surrounding environment to avoid battery subjected to extremely low air pressure.
FCC
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. this
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. these limits are
designed to provide reasonable protection against harmful interference in a
residential installation. this equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
IC This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, science and economic development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
Produced under license from Fender Musical Instruments
Corporation by Generation-S Private Limited.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>