Z-Lite 597PHM Laurent 14 Tall Post Light Installation Guide
- June 12, 2024
- Z-Lite
Table of Contents
Z-Lite 597PHM Laurent 14 Tall Post Light
Product Information
This product is a lighting fixture with multiple variations, including models 597PHM, 599PHM, 597PHB, 599PHB, 597MP3, 599MP3, 597BP3, 599BP3, 597MP6, 599MP6, 597BP6, and 599BP6. It comes with assembly instructions and installation and operation instructions.
Tools & Materials Required
- Screwdriver
- Wire Cutters
- Adjustable Wrench
- Wiring Supplies
Prior to assembly, it is important to refer to the ELECTRICAL CONNECTIONS section. If you do not have electrical wiring experience, it is recommended to consult a do-it-yourself wiring handbook or hire a qualified licensed electrician for fixture installation.
CAUTION: LED fixtures can operate at high temperatures. Please use caution when touching the fixture during operation or after the operation.
Product Usage Instructions
- Turn off the electricity before starting the assembly process.
- Prepare the fixture by following the instructions provided.
- Perform the final assembly steps as described in the manual.
- Ensure that all wire connections are securely made using a wire connector.
- Use the included post-fitter screw to attach the fixture to the desired location.
- Secure the base of the fixture using wood screw anchor sleeves.
Following these instructions will help you properly assemble and install the lighting fixture. Always exercise caution when working with electricity and consult a professional if you are unsure about any step in the process.
FOR YOUR SAFETY WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKINGON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS SHUT OFF. GENERAL You don’t need special tools to install this fixture. Be sure to follow the steps in the order given. Under no circumstances should a fixture be hung on house electrical wires, nor should a swag type fixture be installed on a ceiling that contains a radiant-type heating system. Read instructions carefully. If you are unclear as to how to proceed, consult a qualified electrician.
NOTE: Proper wiring is essential for the safe operation of this fixture
ASSEMBLY INSTRUCTIONS
597PHM & 599PHM & 597PHB & 599PHB & 597MP3 & 599MP3 & 597BP3 & 599BP3 & 597MP6 & 599MP6 & 597BP6 & 599BP6
TOOLS & MATERIALS REQUIRED
Screwdriver Wire Cutters Adjustable Wrench Wiring Supplies
CAUTION
Prior to assembly, refer to ELECTRICAL CONNECTIONS section. If you do not have
electrical wiring experience, refer to a do-it-yourself wiring handbook or
have your fixture installed by a qualified licensed electrician.
GENERAL
- Be sure to read these instructions and review the diagrams thoroughly before beginning.
- Electrical connections must be in accordance with local codes, ordinances, or the National Electric Code. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified licensed electrician.
- Before starting the installation, disconnect the power by turning off the circuit breaker or by removing appropriate fuse at fuse box. Turning the power off at the light switch is not sufficient to prevent electrical shock.
PREPARE THE FIXTURE
NOTE: First turn off the electricity
FINAL ASSEMBLY
- Pull the black, white, and ground wires out of the mounting post.
- While supporting the fixture, connect electrical wires. If your post has a ground wire (green or bare copper), connect the fixture ground wire to it. If not, consult your electrician for proper grounding.
ELECTRICAL CONNECTIONS 120V~, 60Hz
Connect white wire(s) from the fixture to white neutral wire from the supply
circuit. Connect black wire(s) to black hot wire from supply circuit. Connect
green wire to green or bare wire or grounding screw on the mounting bracket.
In all cases grounding conductor to earth must be used. Use UL/CSA Listed wire
connects suitable for the size, type, and number of conductors. No loose
strands or loose wires should be present. Secure wire connectors with UL/CSA
Listed electrical tape. After wires are connected, tuck them carefully inside
the post cup.
- Align the lantern with the mounting post and secure it with screws
- Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn the light switch on to activate the fixture.
- Glass replacement. Twist the glass part. Remember to add the gasket ring, and gasket packaged in the spare parts bag.
CAUTION: LED fixtures can operate at high temperatures please use caution when touching during operation or after operation.
