blue built 935443 Wall Mount for Sonos Era Installation Guide
- June 1, 2024
- blue built
Table of Contents
blue built 935443 Wall Mount for Sonos Era
BlueBuilt Wall Mount for Sonos Era 300
Product code: 935443 – BBWMSE300B
Version: V1.0
Specifications
| Feature | Detail |
|---|---|
| Installation Time | 30 minutes |
| Required Personnel | 1 person |
| Additional Comfort | 1 coffee |
Installation Guide
Step-by-Step Instructions
-
1. **Step 1: Place the speaker**Place the speaker on the speaker stand (2) and tighten the screws at the bottom. Feed the cable through the hole in the speaker stand.
-
Step 2: Mark the height
With the spirit level, measure the height of the wall mount (1). Make sure that it’s straight. Mark the drill holes with the pencil.
3. ### Step 3: Drill holesFor a wooden wall, drill a 3.5mm wide and 50mm deep hole and screw the wall mount (1) with the screws (5) to the wall. For a stone wall, drill an 8mm wide and 50mm deep hole. Place the plugs (4) around the screws (5) and screw the wall mount (1) to the wall.
-
Step 4: Attach the speaker
Attach the speaker stand (2) to the wall mount (1) and optionally store away the cables with the zip tie (3).
-
Step 5: Adjust the speaker
Tilt the speaker upwards or downwards or move it from the left to the right to adjust the sound to your liking.
Checklist
- Suitable surfaces: Wood, Drywall, Concrete, Brick
- Do you have a question? Visit Coolblue.nl/en/customer-service
Note: Coolblue isn’t liable for any injury, damage, or arguments with your partner caused by a wrong installation. Not sure if you can do this yourself? Ask a professional installer.
Do you have a question?
Coolblue.nl/en/customer-service
Coolblue isn’t liable for any injury, damage, or arguments with your partner caused by a wrong installation. Not sure if you can do this yourself? Ask a professional installer.
Contents
In the box:
- Wall mount
- Speaker stand
- Zip tie velcro
- Plugs
- Screws
From your own toolbox:
- Cross-head screwdrivers
- Pencil
- Spirit level
- Drill
FAQ
Q: What type of walls can the wall mount be installed on? A: The wall mount is suitable for wood, drywall, concrete, and brick surfaces. Q: How long does the installation take? A: The estimated installation time is 30 minutes with one person. Q: What should I do if I am unsure about installing the wall mount myself? A: If you’re not sure you can do the installation yourself, it is recommended to ask a professional installer. Q: Where can I find customer service for my questions? A: You can visit Coolblue’s customer service page for assistance.
Trademark Information
BlueBuilt is a registered trademark of Coolbue B.V., Weena 664, 3012 CN Rotterdam, The Netherlands.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>