HOOKE ROAD MMR.30032-1 JL Tailgate Table Storage Lock Box Organizer Tailgate Table Instructions
- June 1, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD MMR.30032-1 JL Tailgate Table Storage Lock Box Organizer
Tailgate Table
Specifications
- Product Name: Tailgate Table Storage Box
- Part Number: MMR.30032-1
- Contents:
- 4 Button Head Socket Cap Bolts Screws, Size(mm): M6*50
- 8 Flat Washer
- 2 Nylon Round Spacer, Size(mm): 11106.2
- 1 Key
Product Usage Instructions
Tools Required:
- 4mm Hex Bit Socket
- Electrical Drill
- Masking Tape
- 9.2-9.5mm Drill Bit
Installation Time:
About 1 hour, 1-2 people may be needed. Installation time may differ
according to your mechanical skill level.
Installation Instruction:
- Step 1: Open the tailgate in preparation for installing the product.
- Step 2: Use the original vehicle holes for installation. Remove the middle plastic plate, punch through the upper two installation holes, and use a positioning paper for drilling the lower two installation holes.
- Step 3: Lift the storage box, align it with the installation holes on the box and the vehicle, then use the provided M6*50 screws for installation. Add nylon round spacers for the outer two holes.
- Step 4: If using a net, insert the hooks into the internal circular holes.
- Step 5: The installation is complete. Enjoy your off-road adventures with this quality Hooke Road product!
Attention:
- The product parts may slightly differ from the manual but should not affect installation.
- Contact your distributor for any questions regarding your purchase.
FAQ:
Q: Can I install the Tailgate Table Storage Box alone?
A: While it is recommended to have 1-2 people for installation, it is
possible to install it alone with proper tools and precautions.
Contents
Part Name
Tools required:
- 4mm Hex Bit Socket;
- Electrical Drill;
- Masking Tape;
- 9.2-9.5mm Drill Bit；
Installation time
About 1 hour, 1-2 people may be needed. Installation time may differ according
to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION!)
To view the electronic version (MMR.30032-1), please scan the QR code.
Installation instruction
- Step 1: Open the tailgate in preparation for installing our product.
- Step 2: All holes are using the original vehicle holes. Please refer to the circled positions in the diagram. You can first remove the middle plastic plate, punch through the upper two installation holes, and then use the positioning paper to assist in drilling the lower two installation holes.
- Step 3: Lift the storage box, align it with the installation holes on the box and the factory vehicle (step 2), then use the provided M6*50 screws for installation. Note that when installing the outer two holes, you need to add nylon round spacer, as shown in the diagram.
- Step 4: If you need to use a net, you can insert the hooks into the internal circular holes.
- Step 5: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of questions about your purchase.
Google Hooke Road to find your parts.
Feel Free To Share Your Vehicle @HookeRoad4x4 With The Hashtag #hookeroad If
You’d Like
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>