HOOKE ROAD BXG.4202-S Tacoma Steel Bumper Stubby Front Bumper Installation Guide

HOOKE ROAD BXG.4202-S Tacoma Steel Bumper Stubby Front Bumper

Product Information

Specifications

• Model: BXG.4202-S
• Parts Included:
  • 8 Hex Bolt M12*35
  • 4 Button Head Socket Cap Bolts Screws M8*20
  • 2 Button Head Socket Cap Bolts Screws M6*16
  • 8 Split Lock Washer D12
  • 8 Flat Washer M12302
  • 2 Flat Washer M6161
  • 8 Hex Nuts M12
  • 4 Flange Hex Lock Nuts M8
  • 2 Flange Hex Lock Nuts M6

Installation Time

• About 1.5 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.

Installation Instructions

1. Remove the factory front bumper.
2. Install the light bar into the bumper with the Button Head Socket Cap Bolts Screws (M8*20), and Flange Hex Lock Nuts (M8).
3. Install the connecting bracket into the bumper with the Hex Bolt (M1235), Split Lock Washer (D12), Flat Washer (M1230*2), and Hex Nuts (M12).
4. If needed, install the license plate bracket with the Button Head Socket Cap Bolts Screws (M8*20), and Flange Hex Lock Nuts (M8).
5. Lift up the bumper and install it with the factory nuts.
6. The installation is complete. Enjoy your off-road adventures with this quality Hooke Road product!

Attention

• The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
• Please feel free to contact your distributor if you have any questions about your purchase.

Scan QR Code for Electronic Version

• To view the electronic version (BXG.4202-S), please scan the QR code.

Contact Information

• Contact Hooke Road for any parts-related inquiries.

FAQ

Q: How long does it take to install the front bumper?

A: The installation typically takes about 1.5 hours with 2-3 people working on it.

Q: Are all the necessary tools included in the package?

A: No, you will need to have a 19mm Shallow Socket, 10mm & 13mm Wrench, 14mm & 19mm Wrench, Drive Socket Wrench, and 4mm & 5mm Hex Bit Socket.

Q: Is the license plate bracket necessary for installation?

A: The license plate bracket is optional and not essential for installing the front bumper.

Contents

PARTS

Tools required

• 19mm Shallow Socket;
• 10mm & 13mm Wrench;
• 14 mm & 19mm Wrench;
• Drive Socket Wrench;
• 4mm & 5mm Hex Bit Socket;

Installation time

• About 1.5 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
• (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
• CAREFULLY BEFORE STARTING INSTALLATION!)
• To view the electronic version (BXG.4202-S), please scan the QR code.

Installation instruction

Step 1

• Remove the factory front bumper. As the picture shows.

• Step 2: Install the light bar into the bumper with the Button Head Socket Cap Bolts Screws (M8*20), Flange Hex Lock Nuts (M8).

• Step 3: Install the connecting bracket into the bumper with the Hex Bolt (M1235), Split Lock Washer (D12), Flat Washer (M1230*2), Hex Nuts (M12).

• Step 4: This step is optional and not 100% necessary. If you need to use the license plate bracket, please install it with the Button Head Socket Cap Bolts Screws (M8*20), Flange Hex Lock Nuts (M8).

• Step 5: Lift the bumper and install it with the factory nuts.

Step 6

• The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention

1. The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of questions about your purchase.

Google Hooke Road to find your parts Post Your Jeep/Truck @HookeRoad4x4 w/Hashtag #hookeroad to Win Discount Every Week

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>