HD Ridez WB-FD312BD Steel Construction Drop Down Style Running Boards Installation Guide
- June 1, 2024
- HD Ridez
Table of Contents
HD Ridez WB-FD312BD Steel Construction Drop Down Style Running Boards Installation Guide
PARTS LIST:
PROCEDURE:
- REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READINSTRUCTIONSCAREFULLY BEFORE STARTING INSTALLATION.
- Starting from underneath the Passenger/Right body panel, locate the front mounting location and the threaded holes in the body panel, ( Figure 1 ). Remove the plastic plugs covering the holes.
- Select the Passenger/Right Front Mounting Bracket. Attach the Mounting Bracket to the front location with (2) 10mm Hex Bolts, (2) 10mm Lock Washers and (2) 10mm Flat Washers, ( Figure 2 ). Do not tighten hardware.
- Repeat Steps 2 & 4 to attach (1) Rear Mounting Bracket to the rear location, ( Figures 3 & 4). Do Not Tighten hardware.
- Select the Passenger/Right DS4 Running Board. Line up the mounting tabs on the Running Board to the rear faces of the Mounting Brackets. Attach the Running Board to the Mounting Brackets with(4)10mm x 35mm Hex Bolts, (8) 10mm Flat Washers and (4) 10mm Nylon Lock Nuts, ( Figure 5 ). Do Not Tighten hardware.
- Level and adjust the DS4 Running Board and tighten all hardware.
- Repeat Steps 1—7 to attach the Driver/Left DS4 Running Board. 8. Do periodic inspections to the installation to make sure that all hardware is secure and tight.
Passenger/Right side Installation Pictured
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>