HD Ridez WB-CD197BD Steel Construction Drop Down Style Running Boards Instruction Manual

HD Ridez WB-CD197BD Steel Construction Drop Down Style Running Boards

Product Information

Specifications

• Product: DS4 Running Boards
• Compatibility: 2015-2024 Chevy Colorado/GMC Canyon Crew Cab
• Part Number: WB-CD197BD
• Parts Included:
  • 1 Driver/Left DS4 Running Board
  • 1 Passenger/Right DS4 Running Board
  • 4 Driver/Left Mounting Brackets
  • 4 Passenger/Right Mounting Brackets
  • 16 10mm x 30mm Hex Bolts
  • 32 10mm x 20mm OD x 2mm Flat Washers
  • 16 10mm Nylon Lock Nuts
  • 16 8mm x 30mm Hex Bolts
  • 16 8mm Lock Washers
  • 16 8mm x 24mm OD x 2mm Flat Washers
  • 16 8mm Clip Nuts

Product Usage Instructions

1. Remove contents from the box and verify all parts are present.
2. Start the installation under the Passenger/Right side of the vehicle.
3. Locate the front mounting location along the bottom and inner side of the body panel.
4. Remove rubber plugs from the front location and slide Clip Nuts into place.
5. Attach the Mounting Brackets to the Clip Nuts using appropriate hardware without tightening.
6. Attach the Running Board to the Mounting Brackets with the provided hardware without tightening.
7. Repeat steps for the Driver/Left side installation.
8. Periodically inspect the installation to ensure all hardware is secure and tight.

Note: Do not use polish or wax containing abrasives on the Running Boards. Clean with mild soap.

PARTS LIST:

PROCEDURE:
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMENDED.

• Start the installation under the Passenger/Right side of the vehicle. Locate the front mounting location along the bottom and inner side of the body panel, (Figure 1). NOTE: It may help to hold a Bracket up in place to help determine the mounting holes to use along the bottom and inner side of the body.
• Remove rubber plugs from the front location. Select (2) 8mm Clip Nuts. Slide each Clip Nut into the large hole and over the smaller hole next to it. Line up threaded nut on the Clip Nut with smaller hole in body panel, (Figure 2).
• Select (1) Passenger/Right Mounting Bracket. Attach the Bracket to the (2) Clip Nuts in the vehicle with (2) 8mm Hex Bolts, (2) 8mm Lock Washers and (2) 8mm Flat Washers, (Figure 3). Do not tighten hardware.
• Repeat Steps 1—3 to attach the remaining (3) Passenger/Right Mounting Brackets, (Figures 3—5). Do not tighten hardware.
• Select the Passenger/Right DS4 Running Board. Attach the Running Board to the rear faces of the Mounting Brackets with (8) 10mm Hex Bolts, (16) 10mm Flat Washers and (8) 10mm Nylon Lock Nuts, (Figure 6). Do not tighten hardware.
• Repeat Steps 1—5 to attach the Driver/Left DS4 Running Board.
• Do periodic inspections to the installation to make sure that all hardware is secure and tight.

To protect your investment, Do not use any type of polish or wax that may contain abrasives that could damage the finish. Mild soap may be used to clean the Running Boards.

Passenger/Right Side Installation Pictured

Frequently Asked Questions (FAQ)

Q: Can these running boards be installed on other vehicle models?
A: These running boards are specifically designed for 2015-2024 Chevy Colorado/GMC Canyon Crew Cab models. Installing them on other models may require modifications and could affect performance.

Q: How do I clean and maintain the running boards?
A: Use mild soap to clean the running boards. Avoid using polish or wax with abrasives as they may damage the finish. Regularly inspect the hardware to ensure it is secure.

Q: Is professional assistance recommended for installation?
A: While not mandatory, professional assistance is recommended to ensure proper installation and secure attachment of the running boards.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>