HD Ridez WB-CS331SD OE Style Matte Black Nerf Bars Running Boards Installation Guide
- June 1, 2024
- HD Ridez
Table of Contents
HD Ridez WB-CS331SD OE Style Matte Black Nerf Bars Running Boards
Specifications
-
Product: S6 Running Board
-
Compatible with: 2021-2024 Chevy Tahoe/Yukon (Excl. XL)
-
Part Numbers: WB-CS331SD (Driver/Left), WB-CS331BD
(Passenger/Right) -
Parts Included:
- 1 Driver/Left S6 Running Board
- 1 Passenger/Right S6 Running Board
- 6 Mounting Brackets
- 6 8mm x 35mm Double Bolt Plates
- 12 8mm x 30mm Hex Bolts
- 24 8mm x 24mm OD x 2mm Flat Washers
- 12 8mm Lock Washers
- 12 8mm Nylon Lock Nuts
Product Usage Instructions
- Remove contents from the box and verify all parts are present.
- Read the instructions carefully before starting the installation. It is recommended to seek assistance.
- Start the installation under the Driver/Left side of the vehicle by removing hardware attaching the running board and factory brackets to the rocker panel.
- Select a Mounting Bracket and attach it to the factory threaded holes using provided hardware. Do not tighten yet.
- Move along the body to the next mounting location and repeat the process with another Mounting Bracket.
- Select the Driver/Left Running Board and insert Double Bolt Plates into the channel in the bottom of the board closest to the Brackets.
- Lift the Running Board up and guide the studs through the Brackets without sliding it, to avoid damaging the finish.
- Place the Running Board onto the Mounting Brackets and attach using provided hardware without tightening.
- Level and adjust the Running Board before fully tightening all hardware.
- Repeat steps for installing the Passenger/Right Running Board.
- Regularly inspect the installation to ensure all hardware is secure and tight.
- To clean, do not use polish or wax with abrasives. Mild soap can be used to clean the Running Board.
FAQ
Q: How should I clean the Running Board?
A: To clean the Running Board, avoid using polish or wax with abrasives. Mild soap can be used for cleaning.
Q: What should I do if some parts are missing from the package?
A: If any parts are missing, please contact customer support for assistance in obtaining the missing components.
S6 RUNNING BOARD
2021-2024 Chevy Tahoe/Yukon (Excl. XL) PART#WB-CS331SD/WB-CS331BD
PARTS LIST
INSTALLATION INSTRUCTIONS
PROCEDURE:
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMENDED.
- Start the installation under the Driver/Left side of the vehicle. Locate and remove all hardware attaching the running board and factory brackets to the rocker panel. (Figures 1 & 2).
- Select (1) Mounting Bracket. Attach the Mounting Bracket to the factory threaded holes with (2) 8mm Hex Bolts, (2) 8mm Lock Washers and (2) 8mm Flat Washers, (Figure 3). Do not tighten hardware.
- Move along the body to the next mounting location. Repeat Steps 1—3 to attach (1) Mounting Bracket to the center and rear mounting locations.
- Select the Driver/Left Running Board. Select (3) Double Bolt Plates. Insert the Bolt Plates into the channel in the bottom of the Running Board closest to the Brackets, (Figure 4). Lift the Running Board up and guide the studs through the Brackets. IMPORTANT: Do not slide, (front to back), the Running Board on the Brackets or damage to the finish may result.
- Place the Running Board onto the Mounting Brackets. Attach the Running Board to the Mounting Brackets with (6) 8mm Flat Washers and (6) 8mm Nylon Lock Nuts, (Figure 5). Do not tighten hardware.
- Level and adjust the Running Board and fully tighten all hardware.
- Repeat Steps 1—6 to attach the Passenger/Right Running Board.
- Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment: Do not use any type of polish or wax that may contain abrasives that could damage the finish. Mild soap may be used also to clean Running Board.
Driver/Left side Installation Pictured
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>