HD Ridez WB-FN311MD Drop Down Style Running Boards Side Step Instruction Manual
- June 1, 2024
- HD Ridez
Table of Contents
HD Ridez WB-FN311MD Drop Down Style Running Boards Side Step
Product Information
Specifications:
- Compatibility: 2021-2024 Ford Bronco 4DR
- Part Number: WB-FN311MD
- Material: High-quality metal
- Finish: Protective coating
- Includes: Driver/Left and Passenger/Right Running Boards, Mounting Brackets, Bolts, Washers, Nuts
Product Usage Instructions
Installation:
- Identify the Driver/Left and Passenger/Right Running Boards and corresponding Mounting Brackets.
- Ensure the vehicle is parked on a flat surface and the engine is turned off.
- Clean the NB1 Running Boards with mild soap before installation.
- Follow the instructions below for the Passenger/Right side installation:
Passenger/Right Side Installation Steps:
Front Mounting Location:
- Attach the Passenger/Right Front Mounting Bracket using (2) 10mm x 30mm Hex Bolts, Lock Washers, and Flat Washers.
Center Mounting Location:
- Attach (1) Passenger/Right Center Mounting Bracket to the center location using appropriate hardware.
Rear Mounting Location:
- Attach the Passenger/Right Rear Mounting Bracket using (2) 10mm x 35mm Hex Bolts, Flat Washers, and Nylon Lock Nuts.
Final Steps:
- Attach the Passenger/Right Running Board to the Mounting Brackets securely.
- Repeat the steps for the Driver/Left side installation.
FAQ:
- Q: Can I use polish or wax on the NB1 Running Boards?
A: To protect your investment, avoid using polish or wax that may contain abrasives. Mild soap can be used for cleaning.
PARTS LIST
| 1 | Driver/Left NB1 Running Board | 1 | Passenger/Right Rear Mounting Brackets |
|---|---|---|---|
| 1 | Passenger/Right NB1 Running Board | 12 | 10mm x 35mm Hex Bolts |
| 1 | Driver/Left Front Mounting Bracket | 12 | 10mm x 30mm Hex Bolts |
| 1 | Passenger/Right Front Mounting Bracket | 12 | 10mm Lock Washers |
| 1 | Driver/Left Center Mounting Brackets | 36 | 10mm x 27mm OD x 3mm Flat Washers |
| 1 | Passenger/Right Center Mounting Bracket | 12 | 10mm Nylon Lock Nuts |
| 1 | Driver/Left Rear Mounting Bracket |
OVERVIEW
INSTALLATION INSTRUCTION
- REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
- Starting from underneath the Passenger/Right body panel, locate the front mounting location and the threaded holes in the body panel, (Figure 1). Remove the plastic plugs covering the holes.
- Select the Passenger/Right Front Mounting Bracket. Attach the Mounting Bracket to the front location with (2) 10mm Hex Bolts, (2) 10mm Lock Washers and (2) 10mm Flat Washers, (Figure 2). Do not tighten hardware.
- Repeat Steps 2 & 3 to attach the Center Mounting Bracket and Rear Mounting Bracket to the center and rear locations, (Figures 3—6). Do not tighten hardware. NOTE: The Center and Rear Mounting Brackets are similar but are unique. The Center Mounting Brackets have a rounded notch in the back and the Rear Mounting Brackets have a flat back, (Figure 4).
- Select the Passenger/Right NB1 Running Board. Line up the mounting tabs on the Running Board to the rear faces of the Mounting Brackets. Attach the Running Board to the Mounting Brackets with (6) 10mm x 35mm Hex Bolts, (12) 10mm Flat Washers and (6) 10mm Nylon Lock Nuts, (Figure 7). Do not tighten hardware.
- Level and adjust the Running Board and tighten all hardware.
- Repeat Steps 1—6 to attach the Driver/Left NB1 Running Board.
- Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment, Do not use any type of polish or wax that may contain abrasives that could damage the finish. Mild soap may be used to clean the NB1 Running Boards.
Read User Manual Online (PDF format)
Loading......