HD Ridez WB-DD179BD Steel Construction Drop Down Style Running Boards Installation Guide

HD Ridez WB-DD179BD Steel Construction Drop Down Style Running Boards

Product Information

Specifications:

• Compatible with: 2009-2018 RAM 1500 Quad Cab, 2019-2024 RAM 1500 Classic Quad Cab
• Part Number: WB-DD179BD
• Material: Steel
• Color: Black

Product Usage Instructions

Installation Steps:

1. Remove contents from the box and verify all parts are present.
2. Read instructions carefully before starting installation. Note: Drilling may be required.
3. Starting at the passenger side-front of the vehicle, remove the sealing tape covering the factory holes in the side of the inner panel.
4. Thread an 8mm Plastic Retainer onto the threaded end against the body panel.
5. Attach the Passenger/Right Bracket to the Bolt Plate using a sequence of washers and nuts. Do not tighten hardware yet.
6. Rotate the Bolt on the Bolt Plate to align with the remaining hole in the mounting Bracket and body panel. Attach using appropriate hardware. Do not tighten yet.
7. For models with factory threaded inserts, attach the passenger/right Front bracket using specified hardware. Do not tighten.
8. Move along the side of the body panel to the center mounting location and repeat installation steps for the passenger/right Mounting Bracket and Support Bracket.
9. Move to the rear location and attach the Driver/Left Mounting Bracket and Support Bracket.

Frequently Asked Questions (FAQ):

• Q: Do I need any special tools for installing the DS4 Running Boards?
  A: Basic hand tools like wrenches and a drill might be necessary for installation. Please refer to the user manual for a detailed list of required tools.

• Q: Are these running boards compatible with other truck models?
  A: The DS4 Running Boards are specifically designed for use with 2009-2018 RAM 1500 Quad Cab and 2019-2024 RAM 1500 Classic Quad Cab models. They may not be compatible with other truck models.

DS4 RUNNING BOARDS
2009-2018 RAM 1500 QUAD CAB 2019-2024 RAM 1500 CLASSIC QUAD CAB PART#WB- DD179BD

PARTS LIST

OVERVIEW

PROCEDURE

REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. DRILLING MAY BE REQUIRED.

1. Starting at the passenger side-front of the vehicle, remove the sealing tape covering the factory holes in the side of the inner panel, (Figure 1).

2. Determine the correct procedure to attach the passenger side front Bracket for your model/year: Models without factory threaded inserts in body panel:

3. Select (1) 8mm Bolt/nut Plate, (Figure 2). Partially thread an 8mm Hex Bolt onto the threaded end of the Nut Plate, (Figure 3). Thread the Hex Bolt in until it is flush with the welded nut. Use the Hex Bolt as a handle and insert the Bolt and Nut Plate into the oval hole, (Figure 4). Feed the threaded bolt on the Bolt Plate through one of the hex-shaped factory holes.

4. Thread (1) 8mm Plastic Retainer onto the threaded end and down tight against the body panel, (Figure 5). NOTE: The Plastic Retainer is designed to keep the Bolt/Nut Plate from falling into the body panel and to aid in Bracket installation.

5. Select (1) Passenger/right Bracket, (Figure 6). Attach the Bracket to the threaded end of the Bolt Plate with (1) 8mm Flat Washer, (1) 8mm Lock washer and (1) 8mm Hex Nut, (Figure 6).
   Important : The passenger/right Front Bracket is the same as the Passenger/right Center and Driver/left Rear Brackets. Do not tighten the hardware.

6. Remove the 8mm Hex Bolt from the nut on the Bolt Plate from Step 2a. Rotate the Bolt on the Bolt Plate until the threaded nut lines up with the remaining hole in the Mounting Bracket and body panel, (Figure 7). Attach the Bracket to the threaded Nut Plate with (1) 8mm x 30mm Hex Bolt, (1) 8mm Lock Washer, and (1) 8mm Flat Washer, (Figure 7). Do not tighten the hardware.
   Models with factory threaded inserts:
   Attach the Passenger/right Front Bracket to the threaded inserts with (2) 8mm x 30mm Hex Bolts, (2) 8mm Lock Washers and (2) 8mm Flat Washers, (Figures 8 & 9). Do not tighten the hardware.

7. 3. Select (1) Passenger/Right Support Bracket. Attach the Bracket to the back of the pinch weld with (2) 6mm Hex Bolts, (4) 6mm Flat Washers and (2) 6mm Flange Nuts, (Figure 10). Do not tighten hardware. Attach the Support Bracket to the Mounting Bracket with (1) 8mm Hex Bolt, (2) 8mm Flat Washers and (1) 8mm Nylon Lock Nut, (Figure 11).
   IMPORTANT: 2009-12 models not equipped with factory holes will require drilling through the pinch weld to fully attach Bracket. Do not drill through pinch weld at this time, (see Step 7).

8. Move along the side of the body panel to the center mounting location, (Figure 12). Repeat Steps 1—3 to install (1) Passenger/Right Mounting Bracket and (1) Passenger/Right Support Bracket to the center mounting location.

9. Move to the rear location, (Figure 13). Repeat Steps 1—3 to attach (1) Driver/Left Mounting Bracket and (1) Driver/Left Support Bracket to the Passenger/Right rear mounting location.

10. Select the Passenger/Right DS4 Running Board. Attach the Running Board to the rear faces on the Mounting Brackets with (6) 10mm Hex Bolts, (12) 10mm Flat Washers and (6) 10mm Nylon Lock Nuts, (Figure 14). Do not tighten hardware.

11. Properly level and adjust the Running Board and fully tighten all hardware. 2009-12 models requiring drilling through pinch trim:
    a. Level the Running Board to the vehicle. Make sure all (3) Brackets are tight against the bottom of the body panel and tighten all mounting hardware.
    b. Mark the location of the slots onto the pinch weld.
    c. Drill (2) 1/4” holes through the pinch weld for each Bracket. IMPORTANT: Do not drill too close to the bottom edge of the pinch weld. Drill the holes in the center of the marked slots.
    d. Repeat Step 3 to attach the Brackets to the drilled holes in the pinch weld. Check for level then fully tighten all hardware.

12. Repeat Steps 1—7 to attach the Driver/Left DS4 Running Board.

13. Do periodic inspections to the installation to make sure that all hardware is secure and tight.

To protect your investment, Do not use any type of polish or wax that may contain abrasives that could damage the finish. Mild soap may be used to clean the Running Boards.

Passenger Side Installation Pictured

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>