Technicolor Default Usernames & Passwords Guide
- June 9, 2024
- Technicolor
Table of Contents
Technicolor Default Usernames & Passwords Guide
The default credentials needed to login to your Technicolor router
The majority of Technicolor routers have a default username of admin, a
default password of -, and the default IP address of 192.168.0.1.These
Technicolor credentials are needed when doing a login to the Technicolor
router’s web interface to change any settings.Since some of the models don’t
follow the standards, you can see those in the table below.
Below the table are also instructions on what to do incase you forget your Technicolor router password, need to reset your Technicolor router to its factory default password, or the password reset doesn’t work.
Tip : Press ctrl+f (or cmd+f on Mac) to quickly search for your model number
Technicolor default Password List (Valid April 2023)
| Model | Default Username | Default Password | Default IP address |
|---|
C1100T (CenturyLink)
C1100T (CenturyLink) default factory settings|
admin| –| 192.168.0.1
CGA0101
CGA0101 default factory settings| admin|
password| 192.168.0.1
CGA0112
CGA0112 default factory settings| admin|
password| 192.168.0.1
CGA4233
CGA4233 default factory settings| user|
VTmgQapcEUaE| 192.168.100.1
DWA1230
DWA1230 default factory settings| admin| –|
192.168.1.1
TC4400
TC4400 default factory settings| admin|
bEn2o#US9s| 192.168.100.1
TC7200
TC7200 default factory settings| admin| admin|
192.168.0.1
TC7200 (Thomson)
TC7200 (Thomson) default factory settings| admin|
admin| 192.168.0.1
TC8305C
TC8305C default factory settings| admin|
password| 10.0.0.1
TD5130v1
TD5130v1 default factory settings| admin| –|
192.168.1.1
TD5136 v2
TD5136 v2 default factory settings | user| –|
192.168.1.1
TD5137
TD5137 default factory settings | admin| admin|
192.168.1.1
TG589vac v2 HP
TG589vac v2 HP default factory settings| admin|
–| 192.168.1.1
(Thomson) TG703
(Thomson) TG703 default factory settings | | ”blank”
”blank”| 192.168.1.254
Instructions and common questions
Forgot your Technicolor router password?
Have you changed the username and/or password of your Technicolor router and
forgotten what you changed it to?Don’t worry: all Technicolor routers come
with a default factory set password that you can revert to by following the
instructions below.
Reset Technicolor router to default password
If you decide to revert your Technicolor router to it’s factory defaults, you
should do the 30-30-30 reset as follows:
- When your Technicolor router is powered on, press and hold the reset button for 30 seconds.
- While still holding the reset button pressed, unplug the power of the router and hold the reset button for another 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
- Your Technicolor router should now be reset to its brand new factory settings, Check the table to see what those are (Most likely admin/-).
- If the factory reset didn’t work, check out the Technicolor 30 30 30 factory reset guide
Important : Remember to change the default username and password to increase the security of your router after the factory reset, as the default passwords are available all over the web (like here).
I still can’t access my Technicolor router with the default password
Make sure that you have followed the reset instructions correctly as the
Technicolor routers should always rever to their factory default settings when
reset.Otherwise, there is always the risk that your router is damaged and
might need to be repaired or replaced.
REFERENCE LINK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>