LEDOLUX HERMES ECO Intelligent LED luminaire Instruction Manual
- June 13, 2024
- LEDOLUX
Table of Contents
LEDOLUX HERMES ECO Intelligent LED luminaire
Product Information
The HERMES ECO luminaire is a high-quality LED lighting fixture designed for various applications in industrial facilities, warehouses, sport facilities, and commercial facilities. It is manufactured by Ledolux Poland Sp. z o.o.
The luminaire is available in two variants:
- 30W model with dimensions of L 1200mm x W 95mm x H 80mm and weighing 1.5kg
- 50W model with dimensions of L 1200mm x W 95mm x H 80mm and weighing 1.5kg
The luminaire operates at a nominal voltage of 200 – 240V~ with a frequency of 50/60Hz. It has a color temperature of 4000K and a luminous efficacy of 140lm/W. The recommended mounting height is between 2 to 6 meters.
NOTE
- Terminal block is not supplied. Installation must be performed by a qualified person. In case of doubts as to the installation or use of the LED luminaire, consult manufacturer
- Replace the luminaire after a failure. Self-repair shall void the warranty.
- This product contains a light source with energy efficiency class C.
- Do not install the luminaire in an environment with high chemical exposure (e.g. chemical factories, animal pens).
- Keep the luminaire in a cool, dry and clean environment. Keep away from water and fire.
- Make sure you disconnect the power supply before installation. Turn on the power after connecting and securing all luminaires in the circuit.
- The light source used in this luminaire should only be replaced by the manufacturer or their service representative, or a similarly qualified person.
- Protect your eyes, avoid looking at the light for a long period of time.
- Dirtiness that settle down on the luminaire due to normal operation shall be cleaned with a damp cloth. Do not use invasive cleaners or cleaning methods.
APPLICATION
- Industrial facilities
- Warehouses
- Sport facilities
- Commercial facilities
DIMENSION
L | W | H | Waga | |
---|---|---|---|---|
30W | 1200mm | 95mm | 80mm | 1.5kg |
50W | 1200mm | 95mm | 80mm | 1.5kg |
SPECIFICATION
-
NOMINAL VOLTAGE: 200 – 240V ~
-
FREQUENCY: 50 / 60Hz
-
COLOUR TEMPERATURE: 4000K
-
LUMINOUS EFFICACY: 140lm/W
-
BEAM ANGLE: 120°
-
OPERATING TEMPERATURE: -20°C ÷ +40°C
-
MOUNTING HEIGHT: 2 – 6m
INSTALLATION
Suspended mounting
- Fix the screws on the ceiling. Attach the mounting cables.
- Adjust the length of the cables.
- Lock the length by turning the clamping handle.
- Attach the mounting bracket to the cables.
- Fix the luminaire to the mounting bracket.
- Connect the luminaire to the power supply according wire marking below.
Ceiling mounting
- Drill holes with a 6mm diameter drill, attach the mounting brackets to the ceiling.
- Mount the luminaire in the mounting bracket.
- Connect the luminaire to the power supply according wire marking below.
Connecting the power cable
- Brown
- Blue
NOT INCLUDED
- Number of clamps: min. 2
Contact information for Ledolux Poland Sp. z o.o.:
- E-mail: info@ledolux.pl
- Tel: +48 696 966 622
Data: 02.03.2023
We reserve the right to make design changes to luminaires.
Ledolux Poland Sp. z o.o.
Ul. Innowacyjna 1
36-060 Głogów Małopolski POLSKA