HD Ridez WB-CN295LMD Wheel to Wheel Drop Step Installation Guide
- June 1, 2024
- HD Ridez
Table of Contents
HD Ridez WB-CN295LMD Wheel to Wheel Drop Step
Product Information
Product Name: NB1 Wheel to Wheel Running Boards
Compatibility: 2019-2024 1500 Silverado/Sierra Double Cab 6 1/2ft Bed, including Diesel w/DEF and 2022 1500 LTD/1500 Limited (Excluding 2019-2021 1500 LD/1500 Limited)
Specifications
- Driver/Left NB1 Running Board
- Passenger/Right NB1 Running Board
- Mounting Brackets and Hardware Included
Product Usage Instructions
Parts List:
- Driver/Left NB1 Running Board
- Passenger/Right NB1 Running Board
- Mounting Brackets and Hardware
Installation Procedure:
- Remove contents from the box and verify all parts are present.
- Start the installation under the Passenger/Right side of the vehicle.
- Read instructions carefully before starting the installation. Assistance is recommended.
Cleaning Instructions:
To protect your investment, do not use any type of polish or wax that may contain abrasives that could damage the finish. Mild soap may be used to clean the Running Boards.
FAQ
Q: Can these running boards be installed on other truck models?
A: These running boards are specifically designed for 2019-2024 1500 Silverado/Sierra Double Cab trucks with a 6 1/2ft bed. Using them on other models may not provide a proper fit.
NB1 WHEEL TO WHEEL RUNNING BOARDS 19-24 1500 SILVERADO/SIERRA DOUBLE CAB 6 1/2FT BED INCL. DIESEL W/DEF AND 2022 1500 LTD/1500 LIMITED EXCL. 19-21 1500 LD/1500 LIMITED
PART# WB-CN295LMD
PARTS LIST
| 1 | Driver/Left NB1 Running Board | 32 | 10mm x 27mm OD x 3mm Flat Washers |
|---|---|---|---|
| 1 | Passenger/Right NB1 Running Board | 16 | 10mm Nylon Lock Nuts |
| 4 | Driver/Left Mounting Brackets | 16 | 8mm x 30mm Hex Bolts |
| 4 | Passenger/Right Mounting Brackets | 16 | 8mm Lock Washers |
| 16 | 10mm x 35mm Hex Bolts | 16 | 8mm x 24mm OD x 2mm Flat Washers |
INSTALLATION INSTRUCTIONS
PROCEDURE:
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMENDED.
- Start the installation under the Passenger/Right side of the vehicle.
- Remove the plastic plugs from the Passenger/Right front mounting location. Select (1) Mounting Bracket. Attach the Mounting Bracket to the factory threaded holes with (2) 8mm Hex Bolts, (2) 8mm Lock Washers and (2) 8mm Flat Washers, (Figures 2 & 3). Do not tighten hardware.
- Repeat Steps 1 & 2 to attach (3) Driver/Left Mounting Brackets to the (3) remaining locations along the rocker panel, (Figures 4—6). Do not tighten hardware.
- Select the Passenger/Right Running Board. With assistance, line up the slots on the mounting tabs on the Running Board to the slots in the rear faces of the (4) Mounting Brackets. Attach the Running Board to the (4) Mounting Brackets with (8) 10mm Flat Washers, (16) 10mm Flat Washers and (8) 10mm Nylon Lock Nuts, (Figure 7). Do not tighten hardware.
- Level and adjust the Running Board and fully tighten all hardware.
- Repeat Steps 1—5 to attach the Driver/Left Running Board.
- Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment, Do not use any type of polish or wax that may contain abrasives that could damage the finish. Mild soap may be used also to clean the Running Boards.
Driver/Left side Installation Pictured
Passenger/Right side Installation Pictured
Documents / Resources
| HD
Ridez WB-CN295LMD Wheel to Wheel Drop
Step
[pdf] Installation Guide
WB-CN295LMD Wheel to Wheel Drop Step, WB, CN295LMD Wheel to Wheel Drop Step,
Wheel Drop Step, Drop Step
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>