HD Ridez WB-NS094SD Black OE Style Nerf Bars Running Boards Installation Guide
- June 1, 2024
- HD Ridez
Table of Contents
HD Ridez WB-NS094SD Black OE Style Nerf Bars Running Boards
Product Information
Specifications:
- Product Name: S6 Running Boards
- Compatible Vehicles: 2005-2024 Nissan Frontier King Cab & 2005-2012 Suzuki Equator Extra Cab
- Part Numbers: WB-NS094SD (Driver/Left) / WB-NS094BD (Passenger/Right)
Product Usage Instructions:
Parts List:
- 1 Driver/Left S6 Running Board
- 1 Passenger/Right S6 Running Board
- 6 8mm x 35mm Double Bolt Plates
- 24 8mm x 24mm OD x 2mm Flat Washers
- 12 8mm Nylon Lock Nuts
- 12 8mm Flange Nuts
- 3 Driver/Left Mounting Brackets
- 3 Passenger/Right Mounting Brackets
Installation Instructions
Passenger/Right Side Installation:
- Attach Passenger/Right Mounting Bracket to the front location using provided washers and nuts.
- Insert Bolt Plate in the bottom channel of the Running Board.
- Attach Passenger/Right S6 Running Board to the Mounting Brackets using washers and lock nuts.
Note: To protect the finish, avoid using abrasive polishes or waxes. Mild soap can be used for cleaning the Running Boards.
FAQ
Q: Can these running boards be installed on other vehicle models?
A: These running boards are specifically designed for 2005-2024 Nissan Frontier King Cab & 2005-2012 Suzuki Equator Extra Cab models. It is not recommended to install them on other vehicles.
Q: How should I clean the running boards?
A: Use mild soap and water to clean the running boards. Avoid using any polish or wax that contains abrasives as they may damage the finish.
S6 RUNNING BOARDS
05-24 NISSAN FRONTIER KING CAB & 05-12 SUZUKI EQUATOR EXTRA CAB
PART#WB-NS094SD/WB-NS094BD
PARTS LIST
1 | Driver/Left S6 Running Board | 6 | 8mm x 35mm Double Bolt Plates |
---|---|---|---|
1 | Passenger/Right S6 Running Board | 24 | 8mm x 24mm OD x 2mm Flat Washers |
3 | Driver/Left Mounting Brackets | 12 | 8mm Nylon Lock Nuts |
3 | Passenger/Right Mounting Brackets | 12 | 8mm Flange Nuts |
INSTALLATION INSTRUCTIONS
PROCEDURE:
- REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY. CLEAN MOUNTING STUDS WITH WIRE BRUSH TO REMOVE PAINT AND DEBRIS.
- Starting on the Passenger/Right front of the vehicle, (Figure 1). Attach (1) Passenger/Right Mounting Bracket to the front location with (2) 8mm Flat Washers and (2) 8mm Flange Nuts, (Figure 2). Do not tighten hardware.
- Repeat Step 2 to attach the remaining (2) Passenger/Right Mounting Brackets to the Passenger/Right center and rear locations, (Figure 3).
- Select the Passenger/Right S6 Running Board. Select (3) Double Bolt Plates. Insert the Bolt Plates into the channel in the bottom of the Running Board closest to the Brackets, (Figure 4). Lift the Running Board up and guide the studs through the Brackets. IMPORTANT: Do not slide, (front to back), the Running Board on the Brackets or damage to the finish may result.
- Attach the Running Board to the Brackets with (6) 8mm x 24mm Flat Washers and (6) 8mm Nylon Lock Nuts, (Figure 5). Do not tighten hardware.
- Level and adjust the S6 Running Board and tighten all hardware.
- Repeat Steps 1—6 to attach the Driver/Left S6 Running Board.
- Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment: Do not use any type of polish or wax that may contain abrasives that could damage the finish. Mild soap may be used to clean the Running Boards.
Passenger/Right Side Installation Pictured
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>