HOMCLOUD VZ-EPS16A4 Smart WiFi Power Strip Instruction Manual

: June 4, 2024
: HOMCLOUD

Table of Contents

Parameters
Safety Warnings
Power Strip Description
Download and Registration
Configuration
Integration with Google Home and Amazon Alexa
Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**HOMCLOUD VZ-EPS16A4 Smart WiFi Power Strip Instruction Manual

**

Parameters

Homcloud code: VZ-EPS16A4, Model n°: WP-E4622M
Input voltage: AC 90-264V, 50/60 Hz
Nominal voltage: AC 230V
Rated current: 16A max load (10A single outlet)
Rated power: 3680W max
USB: DC 5V 2.4A/port (2.4A max load)
Wi-Fi: IEEE 80211 b/g/n, 2.4 Ghz
Indoor use only
Cable length: 1.8 m
Operating temperature: -30°C – 65°C
Operating humidity: <80%RH
Over current protection and fire retardance material

Hereby, Life365 Italy S.p.A., declares that this wireless device complies with the essential requirements and other related provisions of Directive 2014/53/ELI of the European Parliament and of the Council. The declaration can be consulted on the websitewww.homcloud.com/doc. “Homcloud” is a registered trademark of Life365 Italy S.p.A.

Safety Warnings

Please read this manual carefully before using this product and keep it properly for future reference.

Indoor use only.
Plug in fully to the wall outlet while using.
Keep the device out of reach of children.
Keep the device away from water, dump or hot environments.
Do NOT clean with liquid.
Do NOT exceed the recommended electrical ratings.
Do NOT attempt to disassemble, repair or modify the device.

Important

Our App only support 2.4 GHz WI-FI networks, IEEE 802.11 bigin (for configuration both Smart Wi-Fi power strip and mobile phone need to be connected at the same Wi-Fi network).

Power Strip Description

Power Strip

Press and hold for 5 sec until the indicator light rapidly blinks to start configuration mode
Press and hold for 10 sec until the indicator light slowly blinks to start configuration in AP mode.

ON/OFF/Pairing button light indicator

Blue solid light: Smart strip is ON (connected to power).
Light off: Smart strip is OFF.
Blue light rapidly blinking: Configuration mode (EZ).
Blue light slowly blinking: AP mode

Plug outlet indicator lights

Green solid light: Plug outlet is on (one indicator light for each outlet).
No light: Plug outlet or USB ports are off.

USB ports only for charging- no controled by App

Download and Registration

(if you have got already HomCloud App on your mobile and an Homcloud Account go to Part 2 – Configuration).

a. Download HomCloud App from App Store or Google Play or scan OR code below.

b. Enter the register/login interface and register with your country area code and phone number/email address.
c. Wait a few minutes for verification code (by email or text message) and enter it where required along with a password. (between 6 and 20 numbers and letters)

Configuration

a. Connect your mobile device to a 2.4 GHz Wi-Fi Network and launch HomCloud App.
b. Plug in Smart WI-Fi Power Strip Into any electrical outlet.
c. Press and hold On/Ott button for 5 seconds until the blue ON/OFF light indicator rapidly blinks.
d. On the HomCloud homepage tap “add device” or the icon “*”. After that tap “Power Strip” on the WI-Fi smart devices list.
e. Tap “Confirm indicator rapidly blinks”.
f. Insert or confirm Wi-Fi network name and password.
g. Wait for configuration successfully then tap “Done”. h. Rename Power Strip and choose room name if you wish to.

Please visit www.homcloud.com/config for more info regarding the functions of the Wi-Fi Smart Power Strip.

Integration with Google Home and Amazon Alexa

Download and install Google Home or Amazon Alexa App for mobile and control your devices with your voice with Smart Speakers’ or directly with your smartphone. Important: If you want to link Homeloud App to Google Home or Alexa App you need to select “Smart Life” App between the list of Google Home or Alexa partners. (after that passage the user will be automatically direct to Homeloud App). Please visit www.homcloud.com/config for more support.