YCHANG FW32 Magnetic Power Bank User Manual
- June 14, 2024
- YCHANG
Table of Contents
YCHANG FW32 Magnetic Power Bank
User Manual
Thank you for purchasing magsafe power bank. For optimum performance and
safety of using this product, please read these instructions carefully before
operating the product. Please keep this manual for future reference.
Product Specifications
- Battery capacity: 10000mAh
- Lightning Input: SV/1.SA
- Type-C Input: 5.0V/2.4A,9.0V/2.0A,12V/l.5A
- Type-C Output:5JN/3.0A…9JN/2.22Al2V/l.57A
- USB Output: SJN/4.SA, 9JN/2.0A
- Wireless output: 7.5W/15W
Product Structure Drawing
Power On/Off: Press the power on/off button, then the LED indicator on.
LED indicators: The LED indicator will keep flashing when charging, LED
indicators will keep on when discharging. This device was automatically
powered off if no load.
Tip: Please charge this device when the last indicator starts flashing.
This device has safety protection that prevent the battery from damages when
overcharging.
Charging Instruction
Caution: If there is no response when touching the power on/off button,
please charge the device immediately.
Important: Please turn on the power before charging other devices.
Please charge the device at least once every 3 months to avoid the potential
damage of battery cells in the power bank.
Please contact your local recycling center for proper way to discard your used
device in accordance with local regulations.
Warning:
- DO NOT throw the power bank into the fire.
- DO NOT disassemble, open, crush, bend, deform, puncture, shred or submerge the power bank..
- DO NOT attempt to dry up this device with any appliance or heat sources, such as hair dryer or microwave oven.
- Children should be supervised when using this device.
- Avoid dropping this portable power, especially on hard surfaces.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>