BEGA 23 253.4 Wall Luminaire Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 23 253.4 Wall Luminaire
Product Usage Instructions
Wall luminaire for indoor use
Instructions for use
Product description
Overvoltage protection
Installation
Replacement of the LED module
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 23 253.4 Wall Luminaire

Specifications

Lamp Module connected wattage: 10.5 W
Luminaire connec t ed wattage: 12.8 W
Rated temperature: 25 – 45°C
Ambient temperature: 25 – 45°C
Colour temperature: 3000 K / 4000 K
Colour rendering index (CRI): > 90
Module luminous flux: 1735 lm (3000 K) / 1830 lm (4000 K)
Luminaire luminous flux: 1318 lm (3000 K) / 1390 lm (4000 K)
Luminaire luminous efficiency: 103 lm/W (3000 K) / 108.6 lm/W (4000 K)

Product Usage Instructions

Safety
The installation and operation of this luminaire must comply with national safety regulations. Only a qualified electrician should carry out the installation and commissioning. The manufacturer is not liable for damage resulting from improper use or installation. Any modifications to the luminaire should be done by authorized personnel.

Overvoltage Protection
The luminaire’s electronic components are protected against overvoltage according to DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components available on the manufacturer’s website.

Installation
When mounting or dismantling, maintain a minimum distance of 300 mm between the removable cap and the wall. Avoid touching the light output opening of the LED directly during installation or relamping as LEDs are high-quality electronic components.

Spares
For spare parts like spare glass, LED power supply unit, LED modules of different color temperatures (3000 K and 4000 K), and gaskets, refer to the provided part numbers for ordering replacements.

FAQ

Q: Can I install the luminaire myself?
A: No, installation and commissioning should only be done by a qualified electrician to ensure safety and proper functionality.

Q: Where can I find additional protection components against overvoltage?
A: Additional protection components can be found on the manufacturer’s website at www.bega.com.

Wall luminaire for indoor use

BEGA-23-253.4-Wall-Luminaire-1

Instructions for use

Application
Wall luminaire · indoor luminaire made of hand-blown opal glass and metal housing, for all lighting tasks in interior applications.
They are ideal for places where a soft and uniform lighting distribution is required. Luminaire with a high protection class.

Product description

Luminaire made of Aluminium,finish Colour velvet brass
Hand-blown opal glass
Two elongated mounting holes
Width 6 mm · 365 mm spacing
Insulating housing with cable entry for
mains supply cable up to ø 10,5 mm,max. 3 x 1,5@
Connection terminal 2.5@
Earth conductor connection
Complies with flicker requirements in accordance with IEEE 1789,
DIN IEC/TR 63158, DIN IEC/TR 61547-1
LED power supply unit
220-240 V x 0/50-60 Hz
DC 170-276 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 44
Protected against granular foreign bodies
≥ 1 mm and splash water
Impact strength IK02
Protection against mechanical
impacts < 0.2 joule
– Safety mark
– Conformity mark
Weight: 1.8 kg

This product contains light sources of energy efficiency class(es) D

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 10.5 W
Luminaire connected wattage 12.8 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 45 °C

23 253.4 K3

Module designation
LED-0424/930 LED-0425/930

Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 1735 lm
Luminaire luminous flux 1318 lm
Luminaire luminous efficiency 103 lm / W

23 253.4 K4
Module designation
LED-0424/940 LED-0425/940

Colour temperature 4000 K
Colour rendering index CRI > 90
Module luminous flux 1830 lm
Luminaire luminous flux 1390 lm
Luminaire luminous efficiency 108,6 lm / W

Installation

For mounting and dismantling please keep a minimum distance of 300 mm between the removable cap and the wall.
LEDs are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.

Open luminaire:

Loosen knob, remove cap and glass.
Drill mounting holes into the mounting surface – spacing 365 mm.
For the mains supply connecting open the insulation housing – pull open – strip mains supply cable max. 15 mm and lead it into the insulation housing – see sketch.
Make earth conductor connection and electrical connection.
Connect both parts of the insulation housing until they audibly engage.
The outer coating of the cable has to be fully enclosed by the compression nipple.
Fix luminaire with enclosed or any other suitable fixing material onto the mounting surface.
Place glass into luminaire housing, close luminaire with the cap and screw in knob into the cap.

Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.

Replacement of the LED module

The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.

Disconnect the system.
Loosen lateral knob, remove cap and take out glass.
Please follow the installation instructions for the LED module.
Defective glass must be replaced.
Insert glass into luminaire housing, close luminaire with the cap and screw in knob into the cap.

Spares