A-CHAMPS ROX ID Reader Reaction Training Lights System User Manual
- September 25, 2024
- A Champs
Table of Contents
USER MANUAL
ID Reader
WHAT’S IN THE BOX?
HOW TO CHARGE THE ID-Reader
If you charge with a ROXBase:
- Find the power adapter and plug it into a power socket.
- Charge the ID-Reader by placing it on the charging base, with the front side of the reader facing towards the front side of the base. If they are properly placed, they will flash red (empty), yellow (half full) or green (full). A full charging cycle takes between 3-5 hours.
- Once the reader continuous light in green, take them off the charging base and they are ready to go.
If you charge with a charging cable:
- Plug the power adapter into a power socket.
- Plug the magnetic head of the cable into the charging slot on reader (see drawing). If the cable is properly connected, reader will flash red (empty), yellow (half full) or green (full). A full charging cycle takes between 3-5 hours.
- Once the reader flash green, take them off the charging cable and they are ready to go.
Notes:
- Make sure the readers are not wet when placed on the charging base or when connected with a charging cable.
- Do not remove the foam inserts that hold the reader in position.
- Keep the cover open during the charging process.
- In case reader do not blink red, yellow or green while charging, check if they are properly placed on the charging base or if the charging cables are properly connected (in case you are using a charging cable), and that the adapter is properly plugged into the socket.
HOW TO USE THE ID-READER AND BRACELETS
-
Ensure the Reader is Fully Charged:
To charge the reader, refer to our “How to Charge ROX” video and follow the same instructions. -
Turn on the Reader:
To turn on the reader, either remove it from the charging base or manually turn it on by placing your palm on the button until the reader vibrates and flashes green. In both cases, the reader will remain green for 10 seconds to indicate that it is turned on. -
Connect the reader to the app the same way you would sync a ROX.
You can also check our “How to set up ROXPro” video where we explain in detail how to sync a ROX to the app. -
Assign bracelets to athletes:
Once the reader is connected to the app, you can assign bracelets to athletes. You only need to do this once.
To do this, in the menu bar navigate to “MORE” > “Club Athletes” > and tap on “Sync Bracelet” for the athlete you want to synchronize the bracelet with. The reader will blink in green and you will just have to scan the bracelet on the reader with the barcode touching the reader. Once you have successfully done this, the green light will turn off. The bracelet is now synced to that athlete and in the future each time the athlete scans the bracelet on the reader, the result of the following exercise will be assigned to that athlete. -
Select start option
When setting up an exercise, make sure to place the reader outside of the exercise parameter, so that it does not interfere with the action.
Once done, to start the exercise go to the set up page of the exercise then go
to the “More Settings” section, select either the “Start by Reader” or “Start
by Reader and Hit” on the start options. With “Start by Reader”, you will scan
the bracelet on the reader and, after a set countdown that you can choose, the
exercise will start. With the “Start by Reader and hit” option you’ll also
have to scan the bracelet on the reader; a ROX will light up in green: this is
your starting ROX, meaning after you tap it, the exercise will begin. Complete
the exercise, and the results will automatically be assigned to the relevant
athlete.
You can check the results either on the analytics section in the app or on the
results dashboard on your desktop.
www.a-champs.com
help@a-champs.com
Documents / Resources
|
A-CHAMPS ROX ID Reader Reaction Training Lights
System
[pdf] User Manual
ROX ID Reader Reaction Training Lights System, ROX ID, Reader Reaction
Training Lights System, Reaction Training Lights System, Training Lights
System, Lights System, System
---|---