JOYROOM JR-ZS240 Pro Magnetic Wireless Car Charger Holder User Manual
- July 24, 2024
- Joyroom
Table of Contents
JOYROOM JR-ZS240 Pro Magnetic Wireless Car Charger Holder
From the front and back views, the diagram shows the magnetic holder with a light and a universal ball joint. The hook is designed to attach to the car’s ventilation grille.
Indicator Light
| Function | Indicator Light |
|---|---|
| Power On | Light On |
| Standby Mode | Constant Light |
| Charging | Slow Breathing Light |
| Fog | Quick Flashing Light |
Parameters
- Model: JR-ZS240 Pro
- Name: Magnetic Wireless Charging Holder
- Input: 5V⎓2A 9V⎓2A 12V⎓2A
- Output Power: 5W/7.5W/10W/15W (MAX)
- Input: Type C
- Compatible Phone Sizes: 4.7″–6.8″
Accessory Set
- Metal Ring x1
- Separation Film x1
- Cleaning Set x1
- Alignment Card x1
Procedure Description
Step 1
Attach the hook to the product’s ventilation grille, then insert the universal ball joint into the nut and screw it into the back of the product.
Step 2
Tighten the nut by turning it to the right. Insert it into the ventilation grille and tighten the rotary knob by turning it to the left.
Step 3
Connect the Type C charging cable included with the product to the holder and car charger. We recommend using car chargers that support the QC3.0 standard.
Step 4
Attach the phone to the holder so that the magnet attracts it.
Promotion
The product automatically holds and charges iPhone 12/13/14 upon detection. If you do not want to remove the phone case, we recommend using magnetic cases.
Operation Steps
- Open the cleaning set and wipe the phone clean.
- Stick the separation film in the middle of the back of the phone.
- Attach the metal ring in the middle of the back of the phone using the alignment card. Note: As long as the upper and lower scales, left and right scales of the alignment card are equal, the metal ring will be directly attached to the middle of the phone.
- Attach the phone to the holder so that the magnet attracts it.
Specifications
| Model | JR-ZS240 Pro |
|---|---|
| Name | Magnetic Wireless Charging Holder |
| Input | 5V⎓2A 9V⎓2A 12V⎓2A |
| Output Power | 5W/7.5W/10W/15W (MAX) |
| Input | Type C |
| Compatible Phone Sizes | 4.7″–6.8″ |
FAQs
- What is the maximum output power of the charger?
- The maximum output power is 15W.
- What phone sizes are compatible with this charger?
- The charger is compatible with phones that are 4.7″ to 6.8″ in size.
- What type of input does the charger use?
- The charger uses a Type C input.
- Can I use this charger with a phone case?
- Yes, you can use this charger with a phone case. For best results, use magnetic cases.
What does the indicator light signify?
- Power On: Light On
- Standby Mode: Constant Light
- Charging: Slow Breathing Light
- Fog: Quick Flashing Light