soundskins SSRINGS-v3 Foam Speaker Ring Kit Instructions
- June 1, 2024
- soundskins
Table of Contents
soundskins SSRINGS-v3 Foam Speaker Ring Kit Instructions
ALL REQUIRED TOOLS
-
Alcohol based cleaner & microfiber towel
-
Gloves
-
Sharp blade
-
Roller
Removing the Door Panel
-
Start by locating the fastening hardware on the door panel, take the appropriate screwdriver and remove.
-
Once all the screws are removed you can take off the door panel gently watching that you don’t break any of the clips or mounting hardware
-
Pull the panel away slowly and unplug any electrical connections
Applying the Wavy Foam -
Once the door panel is removed the speaker now needs to be removed and unplugged to clear the opening.
-
Behind the speakers should be a metal surface that needs to be wiped free of any debris like oil, dust, moisture
-
Once cleaned and dried apply the wavy foam backing square on the metal surface.
-
Remove the backing paper and start from the top down
a. You can use a roller to minimize any trapped air pockets
Applying The Speaker Ring -
Reinstall the speaker inside the door
-
Wipe down the surround or trim of the speaker plate to be free of any debris like oil, dust, moisture
-
Once cleaned and dried, take one foam strip and measure around the speaker plate.
-
Cut to fit with a pair of scissors
-
Remove the backing paper and apply to the speaker trim
-
Replace the door panel being careful not to pinch any wires as you reattach
SoundSkins Global USA
877-211-5597
usa@SoundSkinsGlobal.com
www.SoundSkinsGlobal.com