anko Charcoal Torquay Day & Night Roller Blind Instruction Manual

DAY & NIGHT
ROLLER BLIND
Installation Instruction

Installation Options

Blockout roller on top (Front rolled) Sheer roller on the bottom (Back rolled)

HOW TO HANG: For best results, we suggest installing the blackout roller in the top position with the fabric rolling forwards, and the sheer roller in the bottom position with the fabric rolling backward.
This will provide clearance for the blinds to operate freely

1. Insert the ball chain system and end plug into the openings of the roller tube.
   Note: The ball chain system should be put into the right side of the roller tube, and the end plug should be put into the left side of the roller tube.

2. Note: Brackets are universal and can be ‘top-mounted or ‘face-mounted to the side of your window.
   • On the window frame, determine the locations for the brackets and mark with a pencil.
   IMPORTANT: Ensure bracket markings are level before proceeding.
   • Two brackets are provided. Bracket (A) is used for the ball chain system. Bracket (B) is used for the end plug.
   Mount bracket (A) on the right side of the window frame chosen for the ball chain system.
   •  Drill pilot holes and then secure with screws (provided).
   Note: use the masonry plugs if drilling into brick or concrete walls.
   •  Mount bracket (B) on the opposite side of the window frame using the same process as a bracket (A).

3. Hanging your blind:
   • Attach the end of the ball chain system to bracket (A)
   • Insert the end of the plug side into bracket (B)

4. IMPORTANT: Installation of Child Safety Device
   WARNING: A chain/cord tension device is required to be fixed to a wall or window frame to reduce the chance of strangulation in young children.
   a) Position the cord tension device on the solid timber/aluminum window frame or stud behind the plasterboard wall, which allows the ball chain to move easily through the tension device. Ensure the ball chain is entirely lowered, stretched, and tangle-free and operates smoothly.
   b) Mark the hole with a pencil. Pre-drill hole with a smaller drill bit, then secure the tension device with the screws provided (as seen in the diagram below). Note: use the masonry plugs if drilling into brick or concrete walls. Note: Do not over drill to avoid cracking the plastic.

5. Blind: Ready for use

CARE INSTRUCTIONS:
DO NOT ALLOW DUST TO ACCUMULATE.
LIGHTLY DUST OR WIPE CLEAN.
DO NOT BLEACH.
SPOT CLEAN WITH WARM WATER IF NEEDED.
DO NOT DRY CLEAN.

WARNING: To avoid creating a possible strangulation hazard for children, the corded internal window covering must be installed in such a way that a loose cord cannot form  a loop 220mm or longer, at a height of less than 1600mm above floor level;
SUGGESTIONS FOR INSTALLING CORDED INTERNAL WINDOW COVERINGS:
i) A cord guide may be installed lower than 1600mm above floor level if the cord is sufficiently secured or tensioned to prevent a loop 220mm or longer from being formed; and
ii) If a cord guide is installed lower than 1600mm above floor level it must be designed to prevent a child from being able to remove the cord, and
ii) if a cleat is used to secure the cord it must be at least 1600mm above floor level because a child is capable of unwinding a cord from a cleat.
cord: rope, strap, string, chain, line, or wire used to manipulate corded internal window coverings.
cleat: a device having a bar with arms around which a cord can be wound and that can be attached to a wall or other structure.

WARNING
WARNING: CURTAIN AND BLIND CORDS HAVE CAUSED THE DEATH OF YOUNG CHILDREN AND MUST BE INSTALLED SO THAT  THEY ARE NOT A STRANGULATION HAZARD. FOLLOW THE INSTALLATION INSTRUCTIONS.

Documents / Resources

| anko Charcoal Torquay Day & Night Roller Blind [pdf] Instruction Manual
Charcoal Torquay Day Night Roller Blind, Charcoal Torquay Roller Blind, Roller Blind, Blind
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>