Newell BP-95 Lcd V-Mount Rechargable Batteries Instruction Manual
- June 4, 2024
- Newell
Table of Contents
Newell BP-95 Lcd V-Mount Rechargable Batteries Instruction Manual
SAFETY INSTRUCTIONS
Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, itis advisable to include the instructions.
- Improper use may cause undesirable effects. To avoid, observe the following precautions.
- Do not drop, hit, crush or expose the battery pack to any shock.
- Do not disassemble the battery case. There is risk of leakage or explosion.
- Keep away from fire, heat sources and high temperature areas and do not expose to direct sunlight.
- Do not expose to water or other sources of moisture.
- Do not expose to extremely cold temperatures as low as -20°C.
- Do not short circuit and do not allow metal objects to come into contact with the battery terminals.
- For use by adults.
- Do not handle damaged battery.
- Dispose of used batteries according to guidelines in the manual.
- Never service the battery yourself. Refer servicing to qualified service personnel.
- Never replace the cells in the battery pack.
- Do not exceed the output current limit of the product when powering auxiliary equipment.
- Periodic cleaning of both the charger and battery pack helps ensure reliable operation. Do not soak exposed metal parts of the battery pack. Do not use solvents, detergents or scouring agents.
CONSTRUCTION
USAGE
Sockets:
- D-Tap
- USB-C
- USB-A
- V-Mount
Recommendations:
Before initial use, a full charge of the battery pack is required. It is not
necessary to discharge the battery before recharging. Charging while some
capacity remains does not affect the original battery capacity. It is even
advisable to make a few part-time charging cycles.
STORAGE
Batteries are best stored 40% charged, in a cool place.
BATTERY LIFE
The battery life is limited. The life is different for each battery and depends on the storage conditions and usage.
If the remaining battery time is considerably shortened, the battery pack is reaching the end of its life. Replace with a new one.
SPECIFICATION
| Charging voltage | 16.8 V |
|---|---|
| Nominal voltage | 14.54 V / 98.8 Wh |
| Capacity | 7000 mAh |
| Maximum charge current | 1 C |
| Maximum discharge current | 10 A |
| USB-A output current | QC2.0: 5V/3A,9V/2A,12V/2AQC3.0: |
3.6-6.5V/3A,6.5-9V/2A,9-12V/2A PD3.0: 5V/3A,9V/3A,12V/3A,15V/3A,20V/3.25A
USB-C output current max 65W| QC2.0: 5V/3A,9V/2A,12V/2AQC3.0:
3.6-6.5V/3A,6.5-9V/2A,9-12V/2A
USB-C input current
| 5V/0.5-3A (4.75-5.25V)9V/0.5-3A (8.75-9.25V)12V/0.5-3A
(11.75-12.25V)15V/0.5-3A (14.75-15.25V)20V/0.5-3.25A (19.75-20.25V)
D-tap charging voltage| 16.8 V
D-tap maximum charge current| 6.8 V
D-tap maximum discharge current| 10 A (it is not recommended to work on 10 A
for a long time)
D-tap maximum output power| 99 W*Only when using D-Tap socket; when using two
outlets power also cannot be over 99 W
Battery weig ht| 540g + 10g
Dimension| 51.3 + 0.3 x 73.4 + 0.3 x 101 + 0.3
Charging voltage| 16.8 V
---|---
Nominal voltage| 14.54 V / 152.7 Wh
Capacity| 10500 mAh
Maximum charge current| 6 A
Maximum discharge current| 10 A
USB-A output current| QC2.0: 5V/3A,9V/2A,12V/2AQC3.0:
3.6-6.SV/3A,6.5-9V/2A,9-12V/2A
USB-C output currentmax 65W| PD3.0: 5V/3A,9V/3A,12V/3A,15V/3A,20V/3.25AQC2.0:
SV/3A,9V/2A,12V/2AQC3.0: 3.6-6.5V/3A,6.5-9V/2A,9-12V/2A
USB-C input current
| 5V/0.5-3A (4.75-5.25V)9V/0.5-3A (8.75-9.25V)12V/0.5-3A
(11.75-12.25V)15V/0.5-3A (14.75-15.25V)20V/0.5-3.25A (19.75-20.25V)
D-tap charging voltage| 16.8 V
D-tap maximum charge current| 6.8 V
D-tap maximum discharge current| 10 A (it is not recommended to work on 10 A
for a long time)
D-tap maximum output power| 150 W”Only when using D-Tap socket; when using two
outlets power also cannot be over 150 W
Battery weight| 810g + 10g
Dimension| 59.5 + 0.3 x 85.0 + 0.3 x 120 1 0.3
Charging voltage| 4 16.8 V
---|---
Nominal voltage| 14.54 V/ 203.5Wh
Capacity| 14000 mAh
Maximum charge current| 6.8 A
Maximum discharge current| 10 A
USB-A output current| JQC2.0: 5V/3A,9V/2A,12V/2A0C3.0:
3.6-6.5V/3A.6.5-9V/2A.9-12V/2A
USB-C output current max 65W| PD3.0: 5V/3A,9V/3A,12V/3A,15V/3A,20V/3.25A
QC2.0: 5V/3A,9V/2A,12V/2AQC3.0′ 3.6-6.5V/3A,6.5-9V/2A,9-12V/2A
USB-C input current| 5V/0.5-3A (4.75-5.25V) 9V/0.5-3A (8.75-9.25V) 12V/0.5-3A
(11.75-12.25V) 15V/0.5-3A (14.75-15.25V) 20V/0.5-3.25A (19.75-20.25V)
D-tap charging voltage| 16.8 V
D-tap maximum charge current| 6.8 V
D-tap maximum discharge current| 10 AR is not recommended to work on 10 A for
a long time)
D-tap maximum output power| 200 W’Only when using D-Tap socket when using two
outlets power also cannot be over 200 W
Battery weight| 1020 g ± 10 g
75.5 ± 0.3 x 85.0 ± 0.3 x 120±0.3
SET CONTENT
- Newell BP V-Mount battery pack.
WASTE MANAGEMENT
The crossed-out trashcan symbol means that waste electrical and electronic equipment, batteries and packagings must not be placed with other household waste. They must be handed over to a separate waste collection system.
WARRANTY
Newell products are covered by a 40-month manufacturer’s warranty.
The manufacturer reserves the right to change the information contained in this manual without prior notice.
Made in China, In China hergestellt, Hecho en China, Fabbricato in Cina, Fabriqué en Chine, Vyrobeno v Číně, Wyprodukowano w Chinach, Сделано в Китае,
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>