MONODEAL S07MW96PQ8 Portable CD Player User Manual

June 14, 2024
Monodeal

MONODEAL S07MW96PQ8 Portable CD Player

MONODEAL-S07MW96PQ8-Portable-CD-Player-PRODUCT

IMPORTANT SAFETY INSTRUCTIONS

Please read this manual carefully before using this player and keep it for later reference.

Warning:
The player To reduce the risk of fire or avoid the damage to the human body, please follow the instructions belon

  1. Never touch the lens of the device. Always keep the disc compartment closed to prevent dust from collecting on the lens.
  2. If the device is unable to scan discs properly, use a standard commercially available cleaner to clean the laser optics. Other cleaning methods may damage the laser optics.
  3. Clean the device with a clean, damp leather cloth. Do not use any cleaning agents.
  4. If the player fails to work, please contact our after-sales staff in time, professional technical suppo staff will provide you with detailed answers.
  5. The player can not be used or stored in moist environment, please keep the player away from any liquid, steam or vapor, such as rain drop, mist etc.
  6. Please do not place any liquid or metal gadgets onto the player, such as pin or a cup of coffee.
  7. Please do not expose the player to the sunlight and keep it away from fire heater. The player can ! be placed under high temperature environment.
  8. All professionals with extensive electronic knowledge and maintenance experience are allowed to disassemble the player for maintenance. The replacement of spare parts must be done in strict accordance with the parameters of the circuit design.
  9. Please do not stick or hit the player with sharp objects.
  10. There are light emitting diodes in this player, staring directly with eyes should be avoid to prevent visual impairment from being caused.
  11. Children under 12 years is not allowed to use the player individually.
  12. When charging, ensure that the Power source and the Charging voltage are DC 5V/1A. Excessive voltage input may cause machine overload damage.

Battery

If the player you purchased contains batteries, please do not disassemble the player or charge the player with other adapters that do not meet the electrical parameters of this product to avoid circuit failure. For your safety, please treat the built-in high-capacity polymer lithium battery by following the instructions below:

  1. Please do not remove the battery pack.
  2. Please do not beat or impact this player.
  3. Please do not make the battery short circuit or pierce it.
  4. Please do not place the player under high temperature which is above140°F (60°C).
  5. Please do not put the battery in a fire.
  6. If the battery has been damaged, please ask a professional to replace the battery with same specification. o contact our after-sales suosort for hain.

Hearing protection

Listen at medium volume:
Please adjust the volume to an appropriate level. If the volume is too high, it may damage your hearing or even cause a permanent damage.
Set the volume to a low level:
Increasing the volume slowly, until a comfortable, clear sound can be heard.
Listen to the audio within a reasonable time frame:
Long time listening, even at a reasonable volume may cause damage to your hearing. Please use the product properly and get a rest when necessary.

Environmental protection

To protect the environment and human health, please follow local laws and regulations on the abandon of the package, electronic product or battery. Please do not put the product together with household waste.

PACKAGING & PRODUCT

What’s in the boxMONODEAL-S07MW96PQ8-Portable-CD-Player-
FIG-2

The CD playerMONODEAL-S07MW96PQ8-Portable-CD-Player-
FIG-1

MONODEAL-S07MW96PQ8-Portable-CD-Player-FIG-3

TROUBLESHOOTING

MONODEAL-S07MW96PQ8-Portable-CD-Player-
FIG-4

USER GUIDE

How to insert a disc
Push the OPEN button to the right to open the door. Insert your index finger into the center hole of the disc and take the edge of the disc with your thumb. Keep the side with words upward while inserting the disc into CD player, press the disc gently to make it steady, and make sure if the disc has been in place. Close the disc door gently and completely, otherwise the player will not read the disc.
(Note: The player is only compatible with CD, CD-R, CD-RW, MP3, WMA, and HDCD formats.)

Insert TF card

After inserting the TF card, press the play button on the player to play it.
NOTE: The TF card supports up to 32GB.
How to turn on the player
There are two ways to turn on the player.

  1. The power switch is located on the side. Slide it to ON position to turn on the player.
  2. When the power switch is in ON position, only press PLAY button once to turn on the player.

NOTE 1: When a disc is played to the end and there is no activity after 20 seconds, the player will enter a
standby mode. Please press the PLAY button to restart the player.
NOTE 2: A HOLD switch is on the side to lock the operations of all buttons to avoid mistouch. When the HOLD switch is in ON position, all buttons will be locked; toggled it to OFF position to release all buttons,

How to turn off the player

  1. Press STOP button twice to turn off the player. (In this way, the player will start from the beginning)
  2. Slide the power switch to OFF position to tum off the player. It will start from where you stopped when you tum it on.

NOTE: Please tum the power switch to OFF position if the player no longer be used for a long time.MONODEAL-S07MW96PQ8-Portable-CD-Player-
FIG-7

How to charge for the player

How to choose a charger: This product is only equipped with one charging cable. You can choose any charger that supports USB2.0 protocol or a standard USB charger of a cellphone running in Android or IOS system to charge for the player.
Charging time: It will take around 4 hours to fully charge the player according to the standard USB2.0 protocol. When the battery is being charged, the LED indicator is red. Once the player is fully charged, the LED indicator will turn green.
NOTE: When there is low batter symbol showing on the screen, it means that you need to charge the player.

PLAY

How to setup the circle mode
Each time the MODE button is pressed, the order of the tracks played will be as follows: Repeat 1(REP1), Repeat all(ALL), random play (SHUF), preview play (INTRO) (only 10 second per track will be played in

How to program the play
Press the PROG button to enter the programming mode when the play stops, press the PREVIOUS or NEXT button to select the track you want to program, press PROG again to confirm the programming. Up to 30 tracks can be programmed in this mode. After that, press the PLAY button to enter the programming play mode. Press the STOP button directly to enter the stop mode to cancel or reprogram.

How to play MP3 disc
Be sure the player is power on,while inserting the MP3 disc into the player, then close the disc door gently and completely. DIR Button: Select the playlist when it plays a MP3 disc.

How to setup sound

How to adjust volume
The volume knob is located on the side of the player. Rotate it to the left or right to decrease or increase the volume. Please listen to music at an appropriate volume to protect your ears.
How to setup EQ effect
Press the EQ button to changes the different sound elfects. There are a total of 5 sound effects: BBS, POP, JAZZ, ROCK, and CLASSIC. A-B Repeat

  • Press it he display shows “A on”.
  • Press it again, the display shows “Ab on”, which means it will be repeat by A-B.
  • Cancel A-B: press the A-B button once again, the display shows” Ab OFF*.

OTHER FEATURES

Time setting of screen sleep
The screen will be turned off after 10 second of inactivity. The screen will be turned on when any button is pressed.

Key lock
After playback mode and sound effects have been setup, you can toggle the power switch to the HOLD position in order to prevent the environment, for example naughty children or crowded occasions from affecting the setting of player.

Last memory

  • ON: The player will return to the last stop-track on the disc.
  • OFF: The player will not return to the last stop-track on the disc.

Press and hold the PROG button to turn the last memory function on or off. The ON or OFF word will be displayed on the screen at this time. The last memory function is turned on by default.
Note: Press the STOP button twice and PLAY button once. it will be played from the begin. Connect to AUX devices
In order to use this player in different occasions, an extra AUX cable has been supplied to connect this player to any device with AUX interface conveniently, such as: home theater, music center, Bluetooth speakers, vehicles, headphone amplifiers and more.

SPECIFICATIONS

MONODEAL-S07MW96PQ8-Portable-CD-Player-FIG-15

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals