SEBSON SD_MS_MINI Magnetic Pads for Smoke Alarm User Guide
- June 15, 2024
- SEBSON
Table of Contents
SEBSON SD_MS_MINI Magnetic Pads for Smoke Alarm
Product Information
Specifications
- Product Name: SD_MS SD_MS_MINI 1
- Intended Use: Magnetic mounting set for objects such as smoke alarms
- Scope of Delivery: 1 magnetic mounting set
General Safety Information
- Danger: This product is not a toy! Keep it away from children and animals! There is a risk of injury!
- The remodeling of this product is not allowed! The proper and safe functioning of the device can no longer be guaranteed if it is modified! In addition, this will invalidate the warranty claim!
- The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of this product!
- We reserve the right to make changes to the product, the packaging, or the operating instructions as well as printing errors.
- Protect the product from external damage, heavy dirt, moisture, and excessive heat!
Suitable Mounting Surfaces
- Smooth and well-adhering surfaces
Unsuitable Mounting Surfaces
- Vinyl wallpaper, polystyrene, non-stick, siliconized, or Teflon-coated surfaces
- Substrates containing loose surface particles
- Surfaces that have been painted over several times
Product Usage Instructions
- Choose a smooth and well-adhering surface for fastening.
- Clean the surface with a lint-free cloth.
- The base or the mounting surface should be selected so that it can hold the weight of the object permanently and reliably. The object must not weigh more than 500g.
- Remove the protective film on the back of the non-magnetic mounting pad.
- Press this mounting pad with the adhesive side firmly against the selected area for about 10 seconds.
- Stick the magnetic mounting pad to the object as described in the two steps above. Now this object can be attached to the already attached mounting pad.
Disposal Instructions
This product may not be disposed of with household waste. At the end of its
useful life, the product must be returned to a point of acceptance for the
recycling of electric and electronic devices.
Please ask your local municipality for the point of acceptance! As the devices
contain valuable recyclable materials, they should be sent for recycling, in
order not to harm the environment or human health from uncontrolled waste
disposal.
FAQ
Q: What is included in the scope of delivery?
- A : The scope of delivery includes 1 magnetic mounting set.
Q: What surfaces are suitable for mounting?
- A : Smooth and well-adhering surfaces are suitable for mounting.
Q: What surfaces are unsuitable for mounting?
- A: Vinyl wallpaper, polystyrene, non-stick, siliconized, or Teflon-coated surfaces, substrates containing loose surface particles, and surfaces that have been painted over several times are unsuitable for mounting.
- Thank you for choosing a product of SEBSON. Read the instructions carefully and keep them looking up before starting this product. A long and failure-free operation can only be guaranteed if the installation and start-up are done properly.
- Before starting up this product, please check for external damage. In case of visible external damage, we immediately dis-advise the start-up of this product!
- Please remove all packaging material of this product before the first start-up and check the content for completeness!
Intended use
- With this SEBSON magnetic mounting set, objects such as smoke alarms can be mounted without drilling.
Scope of delivery
- 1 magnetic mounting set
General safety information
- Danger: This product is not a toy! Keep it away from children and animals! There is a risk of injury!
- The remodeling of this product is not allowed! The proper and safe functioning of the device can no longer be guaranteed if it is modified! In addition, this will invalidate the warranty claim!
- The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of this product!
- We reserve the right to make changes to the product, the packaging, or the operating instructions as well as printing errors.
- Protect the product from external damage, heavy dirt, moisture, and excessive heat!
Substrates that are not suitable for mounting
- Vinyl wallpaper, polystyrene, non-stick, siliconized, or Teflon-coated surfaces.
- Substrates containing loose surface particles
- Surfaces that have been painted over several times
Fixing the mounting pads
(see fig.1):
- Choose a smooth and well-adhering surface for fastening. Clean the surface with a lint-free cloth!
- The base or the mounting surface should be selected so that it can hold the weight of the object permanently and reliably. The object must not weigh more than 500g.
- Remove the protective film on the back of the non-magnetic mounting pad.
- Press this mounting pad with the adhesive side firmly against the selected area for about 10 seconds.
- Stick the magnetic mounting pad to the object as described in the two steps above. Now this object can be attached to the already attached mounting pad.
Disposal note:
- This product may not be disposed of with household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic devices.
- Please ask your local municipality for the point of acceptance! As the devices contain valuable recyclable materials, they should be sent for recycling, in order not to harm the environment or human health from uncontrolled waste disposal.
- SEBSON
- Sebastian Sonntag Walter-Behrendtstr.10 44329 Dortmund Germany
- support@sebson.de VAT-Nr.: GB179436663 WEEE-Reg.-ID.: 500617
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>