dji CHX162-30 Mini 3 Pro Two-Way Charging Hub User Guide
- June 5, 2024
- DJi
Table of Contents
dji CHX162-30 Mini 3 Pro Two-Way Charging Hub
OVERVIEW
-
USB Port
Connect and charge external devices such as a remote controller or mobile phone. -
Power Port (USB-C
Connect to a charger. Recommend to use USB Power Delivery charger -
Function Button
Press to check the battery power level. Press and hold the function button for two seconds to switch the charging priority. -
Status LED
The status LEDs display battery levels for three seconds after the batteries are inserted into the charging hub. The LEDs in an array blink successively during charging. The slower the LEDs blink, the slower the charging speed. It is recommended to use a USB Power Delivery charger and cable for fast charging. The LEDs in an array change to solid green after the corresponding battery is fully charged. The LEDs status and description is the same as the one for the battery level LEDs on the aircraft. Refer to the DJ Mini 3 Pro User Manual for more information.
Usage
DJI Mini 3 Pro Two-Way Charging Hub can be used in the following scenarios:
-
Charging Intelligent Flight Battery Insert the battery into the battery port until there is a click and connect the charging hub to a power outlet. The Intelligent Flight Battery with the highest power level will be charged first and the rest will be charged in sequence according to their power levels. After the battery is fully charged and the corresponding LEDs change to solid green, remove the battery from the charging hub as shown in Figure A2.
-
Using Intelligent Flight Batteries as Power Banks
Insert the Intelligent Flight Battery into the charging hub without connecting the hub to a charger, then connect any external device to the USB port to charge the device. The Intelligent Flight Battery with the lowest power level will be discharged first and the rest in sequence according to their power levels. The status LEDs will display the power level of the battery that supplies power when the external device is being charged. -
Switching Devices to Charge
When both the intelligent flight battery and an external device are connected for charging, the battery will be charged before the external device. Press and hold the function button on the charging hub for two seconds to prioritize charging external devices. Charge for Intelligent Flight Batteries will be continued after the external device is fully charged or it has been charged for 4 hours. When charging an external device, press and hold the function button for two seconds to switch back to charging Intelligent Flight Batteries.- The charging hub may not be able to detect whether the device is fully charged when charging an external device with a high standby power consumption such as a smartphone or tablet. In this case, charging will not switch to Intelligent Flight Batteries until the external device is charged for four hours. Users can manually switch the charging priority by pressing and holding the function button for two seconds
- When the input of the charging hub is lower than 5V/2A, there is a possibility that the USB port will be unable to charge the external devices.