StarTech com 1MFSW Ergonomic Monitor Riser Stand User Guide

: June 1, 2024
: StarTech com

Table of Contents

com 1MFSW Ergonomic Monitor Riser Stand
Specifications
Product Usage Instructions
FAQ
Overview
Package Contents
Installation
Warranty Information
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

com 1MFSW Ergonomic Monitor Riser Stand

StarTech-com-1MFSW-Ergonomic-Monitor-Riser-Stand-PRO

Specifications

Product: Desk Monitor Riser
Height: 3.5in (9cm)
Weight Capacity: 33lb (15kg)
Product ID: 1MFSW-MONITOR-RISER 1

Product Usage Instructions

Assemble the Desk Monitor Riser by following these steps:
Carefully remove the adhesive backing of the Rubber Feet (x4).
Attach the Rubber Feet into the designated Pockets on the Left and Right Riser Supports.
Ensure the Riser Supports are securely attached to the Monitor Riser Stand using Screws (x2) and a Phillips Head Screwdriver.

Assembly Guide

Place one Riser Support onto the bottom of the Monitor Riser Stand with Assembly Tabs fitting inside it.
Insert Screws (x2) through the Riser Supports and into the Assembly Tabs.
Tighten the Screws using a Phillips Head Screwdriver.
Repeat the process with the remaining Riser Support.

FAQ

Q: What is the weight capacity of the Desk Monitor Riser?
A: The Desk Monitor Riser has a weight capacity of 33lb (15kg).
Q: How do I attach the Rubber Feet to the Riser Supports?
A: Carefully remove the adhesive backing of the Rubber Feet and attach them to the designated Pockets on the Left and Right Riser Supports.
Q: Is there a warranty for this product?
A: Yes, this product is backed by a 5-year warranty. For further information on warranty terms and conditions, please refer to www.startech.com/warranty.

Overview

Product ID

1MFSW-MONITOR-RISER

StarTech-com-1MFSW-Ergonomic-Monitor-Riser-Stand-FIG-1

| Component| Function
---|---|---
1| Monitor Riser Stand| • Supports a Monitor up to 33lb (15kg)
2| Riser Supports| • Support the weight of the Monitor Riser Stand

Package Contents

Monitor Riser Stand x 1
Riser Supports x 2
Rubber Feet x 4
Screws x 4
Quick-Start Guide x 1

Requirements

For the latest requirements, please visit www.startech.com/1MFSW-MONITOR-RISER
Phillips head screwdriver

Installation

Assemble the Desk Monitor Riser

Carefully remove the adhesive backing of the Rubber Feet (x 4). Attach the Rubber Feet into the designated Pockets on the Left and Right Riser Supports. (Figure 1)
Place one of the Riser Supports onto the bottom of the Monitor Riser Stand ensuring the Assembly Tabs fit inside the Riser Support. Insert the Screws (x 2) throughthe Riser Supports and into the Assembly Tabs. Use a Phillips Head Screwdriver to tiwghten the Screws (x 2). (Figure 2).
Repeat Step 2 with the remaining Riser Support. (Figure 3)

Regulatory Compliance
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may refer to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a 5-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

StarTech-com-1MFSW-Ergonomic-Monitor-Riser-Stand-FIG-4