SLV OCULUS Surface Mounted Ceiling Light Instruction Manual
- June 2, 2024
- SLV
Table of Contents
SLV OCULUS Surface Mounted Ceiling Light
Product Specifications
- Input Voltage: 220V-240V ~50/60Hz
- Power Consumption: 11W
- Luminous Flux: 780 lm (3000K)
- Color Temperature: 3000K – 2000K
- Color Rendering Index (CRI): >90
- Weight: 0.57 kg
- Dimensions: 20 mm x 9 mm
- Model Numbers: 1004666, 1004667
Product Usage Instructions
Safety Instructions
- The installation of this product should be done by an approved electrician in compliance with local regulations to avoid any risks.
- Avoid altering or modifying the product, fastening anything on it, or covering it. If any defects or malfunctions are suspected, contact a qualified electrician or dealer immediately.
- Ensure that children are not harmed by the product and do not stare directly into the active light source.
Additional Safety Instructions
Follow the manufacturer’s instructions for proper use. Only replace the
light source with assistance from the manufacturer, an authorized technician,
or a qualified person.
Disconnect the product from the mains before cleaning and store it in a dry
and clean place.
Installation Instructions
Switch off the mains before installation. Use only described accessories
and suitable fastening materials. The product is suitable for ceiling surface
mounting as shown in the figure.
When dimming, use a Trailing-edge phase dimmer (Code C) within the color
temperature range of 3000K – 2000K.
Electrical Connection
Ensure wires of the fixed wiring have protective tubes and flexible wire
ends have suitable wire ferrules. Check for secure fixation and proper
function of live, neutral, and protective conductors.
Frequently Asked Questions (FAQ)
-
Q: Who can replace the light source of the luminaire?
A: The light source may only be replaced by the manufacturer, an authorized technician, or a qualified individual. -
Q: What dimmer should be used with the product?
A: A Trailing-edge phase dimmer (Code C) is suitable for dimming within the specified color temperature range.
Safety Instructions
INSTRUCTION MANUAL PART A Ceiling Light
1004666
1004667 
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
Technical Details are subject to change.
SLV UK Unit E Chiltern Park Boscombe Road, Bedfordshire LU5 4LT
Operating Manual PART B
Ceiling Light
1004666 …67
Read manual carefully and keep for further use!
Safety advices for installation and operation. Disregard may lead to danger of
life, burning or fire!
- Any works on the electrical connection only by electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children get not harmed by the product. Do not stare into the active light source.
Additional safety advices =
Use as directed
- Safety class I (1) – Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only in dry indoor area.
- Do not strain mechanically or expose to strong dirt contamination.
- Admissible ambient temperature(ta): -20°C …+50°C.
Light Source
- The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician or a comparable qualified person.
- This product contains a light source of the energy efficiency class F.
Care / Storage
- Disconnect product from mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth.
- Store dry and clean.
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Use only suitable fastening materials.
- Only suited for ceiling surface mounting.
- Install as shown in the figure.
- Suitable Dimmer: Trailing-edge phase dimmer (Code C). Note manufacturer’s instructions.
- The range of the colour temperature while dimming ranges from 3000K – 2000K.
Electrical connection
- Equip wires of the fixed wiring with protective tubes.
- Equip flexible wire ends with suitable wire ferrules!
- Live conductor Terminal L
- Neutral conductor Terminal N
- Protective conductor Earth terminal
Check secure fixation and proper function!
© 25.11.2022 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.