Haylou GT2 Earbuds Instruction Manual
- June 5, 2024
- Haylou
Table of Contents
Haylou GT2 (Android) Video
Haylou GT2 (IOS) Video
How to Pair
1. Take out both two earbuds
2. LED on right earbud will blink white slowly
3. On phone, Tap Haylou GT2 to connect (White LED will turn off )
Master-Slave Switch
- Put right earbud back into case, and left one will auto enter mono mode.
- Take out it again, earbuds will auto enter stereo mode
- Likewise, Put lest earbud back into case and right one will auto enter mono mode
- Take it out again, earbuds will auto enter stereo mode
Music Control
- Press MFB on either earbud to pause/resume playing.
- Double press MFB on right/lest earbud to skip track forward/backward.
Voice Assistant
Triple press MFB to summon Voice Assistant, and say, next song to skip track
Answer/End/Ignore Call
Press MFB to answer incoming call, Press again to end or hold MFB for 1.5s to ignore it.
Re-connection
Take out both earbuds (LED on right earbud will blink white) and they will auto R e-connect to your device.
Factory Setting
1. Hold MFB for 4.5s to power off earbuds, (LED glows red for 2s)
2. Keep holding both MFB’s for 15s or until LED’s blink red and
white 3 times then put them back into charging case.
3. On Phone, Delete relative connectivity record to finish factory
setting.
THANKS FOR WATCHING
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>