HUAYEYC X6 Pro Wireless Earbuds User Manual
- June 5, 2024
- HUAYEYC
Table of Contents
HUAWEI X6 Pro Wireless Earbuds
Precautions
- Please store and use this product in a normal temperature environment;
- Do not expose this product to rain or moisture
- Do not throw it away to avoid product damage caused by falling:
- Do not disassemble, repair and modify this product by yourself
- Do not use chemical solvents to wipe this product;
- do not discard, or as high temperature (temperature is higher than 60 “) and fire,
To avoid danger!
Voice Prompts
- When the phone is turned on, the headset will automatically prompt “boot”.
- When the computer is turned off, the headset will automaticaly prompt “Shutdown”.
- When the pairing is successful, the headset will automatically prompt “Connected”.
- When disconnected, the headset will automatically prompt “disconnected”
- when the battery is low, the headset will automatically voice prompt “low battery”
Product Overview
- product description (use) Mobile phone Bluetooth signal connection, support music, voice control, call power Yes, NFC function, multi-point connection.
- Scope of application: (mobile phone series, system version requirements) iPhone series, system version ios7.0 or above.
Android series, hardware minimum requirements: 2G RAM, system version 4.1 or above
Description Of Function Definition
Power on: In the off state, tap the touch point for more than 3 seconds, the
LED blue light fashes mention The sound indicates that the product is turned
on.
Shutdown: In the boot or standby mode, tap the touch point for 3 seconds,the
product willenter Off state.
Answer the call: When the Bluetooth headset is connected to the phone, please
press the phone
Answer the button or click the touch point on the headset, answer the phone
buton, the headset willenter Telephone answering mode. (1) When the Bluetooth
headset is connected to the mobile phone, press the handset answer
button to hang up or press and hold the touch point on the headset for 1
second, the headset
will enter the phone reject mode. (2) In the call state, put the earphone into
the storage box, the earphone will automatically
End the call
Voice report
(1) Incoming call: An automatic voice prompt will be givern.
(2) Low-power alarm: When the headset is in low-power state, it will
automatically prompt the voice(LOW BATTERY)
Music broadcast
- Play/Pause: When the Bluetooth headset is oconnected to the phone music, touch
- The contacts on the headphones, the music willenter the play or pause mode.
- Music playback next song: When the Bluetooth headset is connected to the mobile phone music,
- Double-click on the left ear to touch a song, double-cick the right ear to toudh the next song
- Volume:Double click the touch point
- Voice Assistant: Four touch points
Music Broadcast
(1) TWS use:
(This product has been TWS paired by default in the factory. It can be
automatically turned on after being taken out from the charging bin.Use
directly) Take out the headset device from the charging compartment at the
same time, then the headset can be automatically turned on, after booting The
red light will fiash twice, and the main ear (ie, the right ear, silk screen
R) will enter the red and blue lights quickly, the secondary ear (ielLeft ear,
silk screen L) blue light flashes slowly, then turn on the phone Bluetooth,
Search for the pairing name: X6. Click on the connection, the mobile phone
display will be nomal after it is connected use.
TWS PAIRING AND UNPAIRING
Remove the headset from the BIN and the red and blue lights will flash. The
headset will automatically match and indicate that both ears have been matched
before shipping. Press any headphone switch button 5 times without connecting
the phone, indicating that the Bluetooth has been disconnected, which means
the pair has been unpaired. When unpaired, both earphones flash red and blue.
To re-pair the ears, press any earphone switch button
three times in a row (prompt matching mode), after the pair is successful, the
earphone will indicate that the pair is Successful. Warm tip: This product is
not connected to the mobile phone case, double-click the switch button can
switch between Chinese and English mode (factory default to Chinese
mode)
(2) Single ear use:
Take out a Bluetooth headset device from the headset charging compartment. At
this time, the headset will automatically turn on (or press and hold the touch
button for 3 seconds in the off state). When the Bluetooth headset enters the
pairing state (ie, the red and blue lights flash quickly), it is turned on.
Mobile phone Bluetooth, search for the pair name: X6. lick on the connection,
the mobile phone display will be connected after use. After the pairing is
successful, the blue light flashes and a voice prompt is connected.
Product parameters
Product Descripton Pro X6
Special Tips
Please use the power adapter of DC5V output to charge this product. Do not use
thepower adapter of the three-nil product. Using the power adapter of the
three-nil product will damage the product, because the user does not listen to
the advice causes all questions, the manufacturer, does not grant the
responsibility.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet ona circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>