FiiO FW5 True Wireless Bluetooth Earbuds Instruction Manual
- June 9, 2024
- Fiio
Table of Contents
True Wireless Bluetooth Earbuds
Instruction Manual
Power ON/OFF
-
Power on and connect:
When using the FWS for the first time, open the charging case, the white lights of the two units will be continuously on for about 3s, and then the FW5 will turn on automatically and enter Bluetooth pairing mode. At this time, your device can search for and connect to the “Fii0 FWS5”. In follow-up uses, it can automatically reconnect to this device once being powered on. -
Charging when powered off:
Put the two units into the charging case and close it. The FW5 will automatically turn off and enter charging state.
(Note: Please tear off the adhesive insulation paper on the metal contact before use.)
Instructions for buttons of the two units
Left unit
Right unit
Note:
Force into pairing mode: Turn off the FW5. Long press buttons B and D at the
same time for about 5s. When the white light of the unit is continuously on
for about 3s and then flashes quickly, it will be forced into the pairing
mode.
Indicator lights of FW5
| Power on/off | White lights continuously on for 3 |
|---|---|
| TWS pairing mode | White lights flash slowly! |
| Standard Bluetooth pairing mode | White lights flash fast |
Note: TWS pairing mode means pairing between the L and R units. Under this state, the FW5 cannot be searched for by any transmitting devices.
Indicator lights of charging case
Continuously on
Flashing
OFF
| Status | Blane level | LED1 | LED2 | LED3 | LED4 |
|---|---|---|---|---|---|
| Charging | Full | ||||
| 75%~100% | |||||
| 50%-75% | |||||
| 25%-50% | |||||
| 0%-25% | |||||
| Discharging (Open/ Close the Case/ Fw5 inside the case ) | 75%-100%] | ||||
| 50%-75% | |||||
| 25%-50% | |||||
| 5%-50% | |||||
| 0%-5% |
Note:
The case is discharging (Open/Close the case/Put in the units):
- When the battery level is between 0% and 5%, the LED1 will flash for 4s and then be off.
- When the battery level is at other levels, the corresponding indicator will be on for 4s and then be off.
Fiio Control The FiiO FW5 can be controlled by the FiiO Control APP. Go to the APP market, searching for “FiiO Control” to download it. OTA upgrade, volume adjustment and many other features are all available in FiiO Control.
Notes and Precautions
- It is recommended to charge the device using a standard 5V charger or charger that could output 1A current or above.
- Please do not place the device in circumstances of excessive high/low temperatures (above 45°C or below 0°C).
- Bluetooth wireless technology has a working scope of approximately 10 meters. Transmission distance is affected by obstacles (human, metal objects, walls, etc.) or electromagnetic environments, which may lead to noise or audio loss.
- Prolonged use of high volume may result in permanent hearing loss. Switching between audio sources may cause a sudden change in volume. Please turn the headphone volume to a lower level before wearing it.
- If the device is to be left unused for a long time, please recharge it periodically to preserve its battery life.
- Please do not use the battery after it is soaked in water; do not use the battery if it is severely swollen; do not disassemble, bump and squeeze the battery, or drop it into fire.
List of Items Included
- FW5
- Charging case
- Ear tips
- USB Type-C cable
- Quick start guide
- Warranty card
To Learn More
To learn more about the product, please visit our website: www.fiio.com For
related product service, please visit https://www.fiio.com/supports
| 
---|---
FUS FAQ
https://www.fiio.com/fw5_faq
| fio.com
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be handed as
household or general waste. It should be handed over to the applicable
collection point for the recycling of electrical and electronic equipment, or
returned to the supplier for disposal. Internal/Supplied Batteries: This
symbol on the battery indicates that the battery is to be collected
separately. This battery is designed for separate collection at an appropriate
collection point.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United
States and other countries. aptX is a trademark of Qualcomm Technologies
International, Ltd., registered in the United States and other countries.
Qualcomm’ optr Adaptive
Hereby, Guangzhou Fib Electronics Technology Co., Ltd declares that this
device is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at:
www.fiio.com/doc
| Function | Frequency | Maximum output power |
|---|---|---|
| Bluetooth | 2402-2480MHz | 7.1dBm |
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>