BaByliss AS90PE Hair Dryer User Manual

: June 16, 2024
: BaByliss

Table of Contents

BaByliss AS90PE Hair Dryer
Product Information
Product Usage Instructions
HOW TO USE
Changing the Attachments
CLEANING & MAINTENANCE
Cleaning the Filter
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

BaByliss AS90PE Hair Dryer

BaByliss-AS90PE-Hair-Dryer-PRODUCT

Product Information

Specifications

Model: AS90PE – B57a
Heat settings: 2 heat settings plus a cool setting
Manufacturer: BABYLISS SARL
Address: ZI du Val de Calvigny, 59141 Iwuy France
Website: www.babyliss.com

Product Usage Instructions

Safety Instructions

Before using the product, it is important to read and follow the safety instructions provided in the user manual.

Heat Settings

The AS90PE has 2 heat settings and a cool setting. To select the desired heat setting, slide the switch to the corresponding position:

*Cool setting (‘’):** Slide the switch to the first position.
Low heat (‘I’): Slide the switch to the second position.
High heat (‘II’): Slide the switch to the third position.

Note: For delicate, fine, bleached, or colored hair, it is recommended to use the lower heat settings. For thicker hair, use the higher heat setting.

Cleaning and Maintenance

To keep your AS90PE in optimal condition, please follow these steps:

Ensure the appliance is unplugged and cooled down before cleaning.
Wipe the exterior surface of the appliance with a damp cloth.
For more thorough cleaning, use a mild detergent and a soft cloth.
Avoid using abrasive cleaners or solvents.
Do not immerse the appliance in water.

FAQ

Q: Can I use the AS90PE on colored hair?

A: Yes, you can use the AS90PE on colored hair. However, it is recommended to use the lower heat settings to prevent damage to the color.

Q: Can I use the AS90PE on thick hair?

A: Yes, the AS90PE can be used on thick hair. It is recommended to use the higher heat setting for better results.

Q: How often should I clean the AS90PE?

A: It is recommended to clean the AS90PE regularly, especially after each use, to maintain its performance and extend its lifespan.
Read the safety instructions first.

HOW TO USE

Ensure your hair is 80% dry and combed through to remove any tangles. Create your parting and divide the hair into sections ready for styling.
Secure the selected attachment onto the airstyler.
Slide the switch to the ‘*’, ‘I’, or ‘II’ position to turn the appliance on and select a heat setting suitable for your hair type.
After use, slide the switch to the ‘0’ setting to switch off and unplug the appliance.
Allow the appliance to cool before storing it away.

Changing the Attachments

Place the attachment onto the handle and line up the two indents on the attachment with the buttons on the handle.
Push the attachment onto the handle until it clicks into place.
To remove an attachment, press and hold the two buttons on the handle and pull the attachment up and away.
Oval tourmaline-ceramic volumising brush
Place the brush head underneath the hair section, close to the scalp.
Use the brush to lift the hair at the roots to create volume.
Hold in place for 5–10 seconds. Then apply cool air to fix the style in place.
Slowly move the styler down through the hair, towards the ends.
Repeat for each section of hair.
Smooth Blow-Dry Brush Attachment
Place the brush head under a section of hair, close to the root with the bristles pointing upwards.
Use the other hand to pull the hair section taut against the brush head.
Gently slide the brush head through the section of hair, until you reach the ends.
Repeat for each section of hair.

Heat Settings

There are 2 heat settings plus a cool setting. Slide the switch to the first position to select the cool setting ‘*’, the second position for the low heat ‘I’, and the third position for the high heat ‘II’.
Please note: If you have delicate, fine, bleached, or colored hair, use the lower heat settings. For thicker hair, use the higher heat setting.

CLEANING & MAINTENANCE

To help keep your appliance in the best possible condition, please follow the steps below:

General

Ensure the appliance is switched off, unplugged, and cool.
To clean the outside of the appliance, wipe with a damp cloth. Make sure that no water enters the appliance and it is completely dry before use.
Do not wrap the lead around the appliance; instead, coil the lead loosely by the side of the appliance.
Do not use the appliance at a stretch from the PowerPoint.
Always unplug after use.

Cleaning the Filter

Ensure the appliance is switched off, unplugged, and cool.
Holding the handle of the appliance firmly, lift the filter open from the grooves close to the cord bushing. This will enable the rear filter top to open.
Using a soft brush, clean any hair and other debris from the filter.
Replace the rear filter by closing the lid shut.
Electric hair dryer brush for styling and drying hair
Manufacturer: Babylis SARL
Industrial area of Val de Calvini 59141 Evie

France