tapo RV30 Max Plus Robot Vacuum and Mop User Manual

: September 27, 2024
: tapo

Table of Contents

tapo RV30 Max Plus Robot Vacuum and Mop
Product Information
Product Usage Instructions
Overview
HOW TO USE
Connect to Wi-Fi
Safety Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tapo RV30 Max Plus Robot Vacuum and Mop

Product Information

Specifications

Type: Robot Vacuum & Mop
Brand: Tapo
Power Source: Dock
Connectivity: Wi-Fi

Product Usage Instructions

Position the Dock
Place the dock on a level surface, flat against a wall, without obstacles within 1.5m (4.9ft) in front and 0.5m (1.6ft) on the left and right. Connect the power cord to the dock and power source. Keep the cable tidy.

Remove Protective Strip
Remove the protective strips on both sides of the front bumper.

Turn On Robot Vacuum
Press and hold for 3 seconds to turn on the robot vacuum. You will hear either “Turning On” or a beep, indicating a successful power-on.

Remove Protective Film
Remove the protective film on the front bumper.

Power On and Charge
Place the robot vacuum on the charging dock or tap to send it back to the dock to charge. It will return to the dock at the end of a cleaning job and whenever it needs to recharge.

Download the Tapo App and Connect to Wi-Fi

Download the Tapo app from the App Store or Google Play, then log in.
Open the Tapo app, tap the + icon, and select your model.Follow the step-by-step instructions to easily set up your robot vacuum.

Frequently Asked Questions (FAQ)

Q: Where can I find troubleshooting and voice prompts for issues?
A: You can find troubleshooting and voice prompts for issues at thislink.

Need some help?
Visit www.tapo.com/support/ for technical support, user guides, FAQs, warranty & more

Setup Videos
Scan QR code or visit
https://www.tp-link.com/support/setup-video/#robot-vacuum

Overview

Power/Clean

Press once: Start/pause cleaning.
Press and hold for 3 seconds: Turn on/off the robot vacuum.

Dock

Return to the dock to charge.
(For Plus Series) Empty the bin when docked.

Spot Cleaning/Child Lock

Press once: Start spot cleaning.
Press and hold for 5 seconds: Turn on/off the child lock.

+ Combination Button

Press and hold simultaneously for 5 seconds:
Enter setup mode to configure network.
Press and hold simultaneously for 10 seconds:
Restore to factory default settings.

LED

Red: Battery level < 20%; Error
Orange: Battery level between 20% and 80%
Green: Battery level > 80%

HOW TO USE

Postion the Dock
Place the dock on a level surface, flat against a wall, without obstacles within 1.5m (4.9ft) in front and 0.5m (1.6ft) on left and right. Connect the power cord to the dock and power source. Keep the cable tidy.

Notes

To ensure a better user experience, make sure the area is with good Wi-Fi signal.
Do not place it in direct sunlight. Ensure the area around the dock is free of clutter to improve docking performance.
Always keep the dock powered on, otherwise the robot vacuum will not automatically return. And do not move the dock frequently.

Remove Protective Strip
Remove the protective strips on both sides of the front bumper.

Remove Protective Film
Remove the protective film on the front bumper.

Turn On Robot Vacuum
Press and hold for 3 seconds to turn on the robot vacuum. You will hear either “Turning On” or a beep,indicating a successful power-on.

Power On and Charge
Place the robot vacuum on the charging dock or tap to send it back to the dock to charge.
It will return to the dock at the end of a cleaning job and whenever it needs to recharge.

Notes

When the LED of the charging dock flashes 3 times and then goes out, the charging will begin.
We recommend that you charge the robot vacuum fully for about 4 hours prior to starting the first cleaning job.
To prevent corrosion, do NOT add any cleaning agents.
WIPE the water tank dry after adding water.

Connect to Wi-Fi

Download the Tapo App and Connect to Wi-Fi

Download the Tapo app from the App Store or Google Play, then log in.
Open the Tapo app, tap + icon, and select your model.
Follow the step-by-step instructions to easily set up your robot vacuum.

Troubleshooting & Voice Prompts for Issues:
https://www.tp-link.com/support/faq/3525/

For Robot Vacuum:
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tapo.com/support/ce/.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tapo.com/support/ukca/

For Auto-Empty Dock / Battery:
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tapo.com/en/support/ce/
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations
2016. The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/

Safety Information

Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Warning
Avoid replacement of a battery with an incorrect type that can defeat a safeguard. Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

The instructions shall state the substance of the following:
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The appliance is only to be used with the power supply unit provided with the appliance.

WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.
The appliance contains a 2600mAh lithium-ion battery.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Operating Frequency/max output power

No restrictions exist in the use of radio frequencies or frequency bands in all EU member states, EFTA countries, Northern Ireland and Great Britain.