super bright leds CBT-RGB10 Bluetooth RGB Controller User Manual
- May 15, 2024
- super bright leds
Table of Contents
User Manual
CBT- RGB10
Bluetooth RGB Controller
Important: Read all instructions prior to installation.
App Functions
Master power button at the top will turn controller output off.
The settings tab in the top right contains the app’s user guide and allows
background image to be changed. It also allows “shake” function to be enabled,
which changes color or mode (depending on screen displayed) to another random
color or mode when device is shaken.
Color Adjustment (Adjust) screen allows allows selection of color using a
color wheel. It also features a brightness adjustment, some preset color
options, and the ability to select a photo and match a specific color in the
photo.
Music Mode (Music) screen allows light(s) connected to the controller to
change with music played on the device, through the app.
Note: Most downloaded songs from apps like Apple Music will show up, but
due to licensing rights and app settings, all songs may not be available.
Voice Control (Tape) screen is not compatible with this device.
Mode Selection (Style) screen selects one of twenty preset modes made of
specific color(s) and patterns, e.g. pulsating and strobing, as well as
allowing speed adjustment of selected mode.
Timed Operation (Timing) screen has settings for time of day and day of
week to program preset times to turn the controller on and off. This function
does require a paired device to be present and on for controller to respond.
Up to six presets can be programmed at one time and each preset can either
turn the controller output off or on. When powering on, the mode or static
color the controller was last set to will be used.
Specifications
| Model | CBT-RGB10 |
|---|---|
| Operating Voltage Range* | 5–24 VDC |
| Maximum Output Current | 30 A (10 A per channel) |
| Operating Temperature | -4–176° F (-20–85° C) |
| IP Rating | IP25 |
| Maximum Remote Range | 65 ft (20 m) |
*Note: Output voltage will be equal to input voltage.
Safety and Notes
- Product should be installed in accordance with applicable national, state, and local building and electrical codes.
- To reduce the risk of electric shock, ensure that the main power source and/or circuit breakers are switched off before performing any installation or wiring procedures.
- Ensure all mounts are securely attached. Failure to properly secure controller may result in damage or injury, for which the manufacturer does not assume responsibility.
Downloading the App
Search for the “Happy Lighting” app in Apple App Store or Google Play Store on compatible device equipped with Bluetooth 4.0 or above. QR code links to app download page.
http://download.appglobalmarket.com/happylightingdownload.html
Installation Instructions
- Secure the controller in a secure, dry location using screws or double-sided foam tape (hardware not included).
- Connect supply wiring and wiring to RGB light.
- Apply supply power.
- Open app on Bluetooth equipped device and confirm successful pairing. Menu button on the top left will show controller under my devices if properly paired. If needed, reset app and switch Bluetooth off and back on to reset connection.
Note: Only one device can be connected to the controller at any time.
Wiring Diagram
Optional Remote Pairing
In order to pair the remote, power off the controller and then power it back on. Immediately after powering the controller on, hold the ‘R’ and ‘B’ buttons on the remote.
Rev Date: V1
12/08/2022
4400 Earth City Expy, St. Louis, MO • 63045 866-590-3533
•superbrightleds.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>