SUPER BRIGHT LEDS MRKDX-X1 Series Magnetic Mount LED Tube Light Retrofit Kit User Manual
- June 4, 2024
- super bright leds
Table of Contents
SUPER BRIGHT LEDS MRKDX-X1 Series Magnetic Mount LED Tube Light Retrofit
Kit User Manual
Safety and Notes
- Ensure fixture input voltage is compatible with LED retrofit kit before installation.
- This product should be installed by a certified electrician in accordance with applicable national, state, and local building and electrical codes.
- To reduce the risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures. Inspect wiring and components for damage before restoring power to the fixture.
- Avoid looking directly into the lamps when illuminated.
- Not intended for use with emergency lighting.
- For ballast bypass only
Specifications
Model | MRKDHx-xKxW-xS |
---|---|
Dimming | 0–10 V |
Check product label for specific electrical specifications related to
installation.
Improper installation will void warranty.
Wiring Diagram
Installation
-
Remove fixture cover. Disconnect power.
-
Remove old tubes.
-
Remove reflector / ballast cover.
-
Remove ballast and wires going to the connectors. Mount strips and driver using built-in magnets.
-
Connect power wires to driver, and connect light strips to output of driver. See wiring diagram.
-
Reassemble fixture. Reconnect power.
Rev Date: V1 12/14/2021
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533
superbrightleds.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>