super bright leds LRK-50K100T LRK Series LED Retrofit Kit User Manual
- June 4, 2024
- super bright leds
Table of Contents
super bright leds LRK-50K100T LRK Series LED Retrofit Kit
Safety and Notes
- Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of fixture’s electrical system. If not qualified, do not attempt installation and contact a qualified electrician.
- Only install this kit in fixtures that have construction features and dimensions that will allow proper installation. Ensure the power consumption of retrofit kit does not exceed the rating of the fixture.
- If drilling is required during installation of kit use caution not to damage wiring or other components.
- To prevent damage to kit, ballast must be bypassed.
- LED chips should not be touched by hands or any other installation tools. Use included protective cover while installing retrofit.
- Ensure all parts are present and power is off prior to installation.
Environmental Specifications
Environmental Specifications
Operating Temperature| -4°–113° F(-20°–45° C)
Environmental Rating| non-weatherproof
Parts Included
| Name | Qty |
|---|---|
| Lamp | 1 pc |
| Driver | 1 pc |
| Mounting Bracket | 1 pc |
| U-Bracket | 1 pc |
| M6 Hexagonal Head Bolt | 1 pc |
| Lock Washer | 1 pc |
| M4 Screw | 45 W,100 W, |
120 W – 2pcs
| 150W – 4pcs
Crimp-on Wire Nut| 5 pcs
2 Pin Terminal Blocks| 1 pc
3 Pin Terminal Blocks| 1 pc
Installation
-
Attach U-Bracket to lamp using Phillips Head M4 screws. Do not tighten (Fig. 1).
-
Attach Mounting Bracket to U-Bracket using M6 Bolt, Nut, and Locking Washer. Method of mounting will depend on fixture being retrofitted. Do not tighten bolt (Fig. 2).
-
Attach Mounting bracket to fixture. Hardware for mounting kit to fixture is not included. Adjust lamp angle, Mounting Bracket height and U-Bracket position until lamp is in desired position. Tighten screws (Fig. 3).
Note: Ensure ballast has been bypassed prior to step 4. -
Mount driver into fixture and make connections as shown in Fig. 4. Hardware for mounting is not included. Remove protective cover on lamp prior to restoring power.
Note: 45 W model is not dimmable.
Rev Date: V3.0 12/13/2021
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533
superbrightleds.com