SUPER BRIGHT LEDS LFB-S01A LED Ready Landscape Spot and Flood Lights User Manual
- June 4, 2024
- super bright leds
Table of Contents
superbrightleds.com
LFB-S01A, LSBF-BZ, and LSFF-BZ
User Manual
LFB-S01A LED Ready Landscape Spot and Flood Lights
Important: Read all instructions prior to installation.
LED Ready Landscape Spot/Flood Lights
Safety and Notes
- For use with OUTDOOR, low-voltage landscape lighting systems ONLY.
- NOT FOR USE with submersible or pool/spa equipment.
- Do not submerge in water, the product can be damaged.
- For low voltage use only. The power supply voltage must match the installed bulb.
- LFB-S01A and LSBF-BZ are designed for MR16 bulbs (GU5.3 base, up to 50 W) only. LSFF-BZ is designed for G4 bulbs (up to 20 W) only. Bulb not included.
Recommended Accessories
Part Number | Description |
---|---|
WWN-2212 | silicone-filled twist-on wire connector |
SFT-20 | self-fusing silicone tape |
WP14-2DB | 14 gauge landscape wire |
WP12-2DB | 12 gauge landscape wire |
LFB-SK04 | 10 in. brass stake |
Installation Instructions
-
Install compatible bulb.
-
Lay fixtures out as they will be installed.
-
Run landscape wire from the power supply to each light. The wire must be within 3” of the mounting stake to allow power connections to be made.
-
Use waterproof connectors to connect lights to supply wires as well as wires running to additional lights.
-
Using a small shovel, loosen the ground where the fixture will be installed.
Press the stake into the ground. Wetting the ground can loosen the soil to ease installation if needed.
Note: Do not use a hammer or exert force on the fixture by using it to drive the stake into the ground as this may cause damage. -
Turn on supply power and ensure all fixtures are working. If one or more individual fixtures are not working, check each connection. It is recommended to wrap all connections in electrical or self-fusing tape.
-
Bury landscape wire, fixture pigtails, and connectors. A depth of 3” is recommended. Wires and connectors can also be covered by mulch or stone.
Assembly
LFB-S01A
|
LSBF-BZ
| LSFF-BZ
---|---|---
Note: Assemble fixtures as shown. Run power wires through slots in stakes.
Rev Date: V1 04/06/2022
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533
superbrightleds.com
Documents / Resources
|
SUPER BRIGHT LEDS LFB-S01A LED Ready Landscape Spot and Flood
Lights
[pdf] User Manual
LFB-S01A, LSBF-BZ, LSFF-BZ, LED Ready Landscape Spot and Flood Lights
---|---