super bright leds LFS-30K60D Solar Powered Spot Light Kit User Manual
- May 15, 2024
- super bright leds
Table of Contents
User Manual
LFS-30K60D
Important: Read all instructions prior to installation.
Solar-Powered Spot Light Kit
Safety and Notes
- For outdoor use only.
- Not for underwater use. Do not use with submersible or pool/spa equipment.
- Light will shut off automatically in excessively cold temperatures (below minimum operating temp.) to protect the light.
- Solar panel must be cleaned every three months for best lighting results.
- Weather and physical obstructions that block sunlight will negatively affect the ability of the light to charge. Make sure the light is installed in a location where direct sunlight is present.
Model | LFS-30K60D |
---|---|
Operating Temperature | 14°–104° F (-10°–40° C) |
IP Rating | IP65 |
Charge Time | 4–6 hours direct sunlight |
Operation Time | 6 hours (high), 12 hours (low) |
Installation Instructions
-
Attach the mounting arm to lights and panel.
-
Select locations within the cord length to install all components.
-
If wall mounting, use flange to make holes and mount lights and panel securely to wall. If ground mounting, attach stake and firmly press stake end of light/panel into moist soil without applying pressure to the light head or panel directly.
Note: make sure installation location has adequate sunlight to support proper charging. -
Connect wiring.
-
Press the power switch once to set the panel to low mode. Press the switch a second time to set it to high mode. Pressing a third time will return the system to off.
-
Adjust light heads and panel to desired angle.
Rev Date: V1 08/24/2023
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533
superbrightleds.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>