Quantek CP6-RX Wiegand Proximity Reader User Manual

May 15, 2024
QUANTEK

Quantek CP6-RX Wiegand Proximity Reader

Specifications

  • Brand: C Prox Ltd (inc Quantek)
  • Model: CP6-RX
  • Type: Wiegand Proximity Reader
  • Material: Metal anti-vandal
  • Output: Wiegand
  • Compatibility: EM, HID & Mifare cards & fobs
  • Installation: Indoor or Outdoor

Product Usage Instructions

1. Installation

  1. Locate a suitable mounting position for the CP6-RX reader, considering accessibility and security.
  2. Use the provided security driver to open the reader and access the mounting holes.
  3. Securely fix the reader using the wall-fixing plugs and self-tapping screws.

2. Card/Fob Reading

  1. Present the EM, HID, or Mifare card or fob within close proximity to the reader.
  2. The reader will detect and read the card or fob, granting access as programmed.

3. Maintenance

  1. Regularly clean the reader surface with a soft, damp cloth to ensure proper functionality.
  2. Inspect the reader for any physical damage and address promptly if found.

FAQ

  • Q: Can the CP6-RX reader be used with other types of access cards?
    • A: The CP6-RX is compatible with EM, HID, and Mifare cards and fobs. Other card types may not be supported.
  • Q: Is the CP6-RX suitable for outdoor installation?
    • A: Yes, the CP6-RX is designed for both indoor and outdoor use, providing versatility in installation locations.

Description

The CP6-RX is a metal anti-vandal proximity reader with Wiegand output, suitable for installing indoors or outdoors and capable of reading EM, HID & Mifare cards & fobs.

Packing list

Name Quantity
Reader 1
Manual 1
Security driver 1
Wall fixing plugs 2
Self-tapping screws 2

Specification:

  • Operating voltage: 9-18Vdc
  • Standby current: <25mA
  • Card frequency: 125KHz (EM & HID) and 13.56MHz Mifare
  • Output format: EM Wiegand 26 bits, Mifare Wiegand 34 bits, HID Wiegand 26-37 bits automatic
  • Reading distance: 1-5cm
  • Operating temperature: -40 to +60 °C
  • Waterproof rating: IP66
  • Pre-wired with 50cm cable
  • Dimensions: 103 x 48 x 19mm

Installation

  • Unscrew the backplate from the reader and use the backplate to mark the 2 fixing holes (A & C) and the cable entry hole (B).
  • Drill the holes using the correct-sized bit.
  • Insert the wall plugs and fix the back plate to the wall with 2 screws.
  • Thread the cable through hole B and make the connections (see below).
  • Attach the unit to the back plate

Wiring

Colour Function Notes
Red Power +DC (9-18V)
Black GND Ground
Green D0 Data 0
White D1 Data 1
Brown LED Green LED light control
Yellow Buzzer Buzzer control

Connection Diagram

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals