Quantek CPWIFISW1 Smart WI-FI Switch User Manual

Table of Contents

Device Setup

Download the Smart Life App by searching in the mobile App stores or scanning the provided QR codes.
Create an account in the App, or if you already have an account, just login.
Supply power to the WiFi switch and wire the relay output to the device you are controlling.
Power on the device.
Reset the device by pressing the match button for 5 seconds until the red network LED indicator is flashing quickly every 0.5 seconds (if the network indicator is already flashing quickly, skip this step).
Add & connect the device in the App:
Tap ‘+’ then ‘Add Device’.
After a few seconds, the device will be found, tap ‘Add’.
Select a 2.4GHz WiFi network, enter your password, and click ‘Next’.
Name the device.
When the network is disconnected, the switch will automatically change to Bluetooth control from the phone (Must be within range).
Click the On/Off button on the App to switch the relay and control the device.

App Functions
Tap here to enter function operation interface.

Sharing Device with Other Users
Other users must have a Smart Life account.

Tap ‘Share Device’.
Tap ‘Add Sharing’.
Tap ‘Share with the Account Smart Life’.
Enter the email or phone number of the account you want to share with and click ‘Done’.
Tap on the name of the account you have shared with.
You can set a validity period (if required) or unshare the device.

Create Smart Scenes and Setup Siri

Tap ‘Scene’ then ‘+’ or ‘Create Scene’.
Tap ‘Launch Tap-to-Run’.
Tap ‘+’.
Tap ‘Run the Device’.
Select the appropriate switch.
Select the name of the switch again, select ‘ON’, and then tap ‘Save’ followed by ‘Next’.
Tap the 3 dots to rename the scene, then tap ‘Save’.
Tap ‘Add to Siri’.
Select the scene.
Tap ‘Change Voice Phrase’ and enter the desired phrase.
Tap ‘Done’.

Please note, to use with Siri on other phones, you must share the ‘Home’ with other accounts, rather than just the device.

Connects to home WiFi
Turn devices on and off remotely through the App
Manage numerous smart switches and other Tuya compatible smart devices from one App
Compatible with Amazon Alexa, Google Assistant & Siri (via Shortcuts)
Set schedules and timers
Switch device on automatically when you get home (Beta)
Share access with other users permanently or for a set time period
Remove access to other users instantly
Latching or timed mode
Group device management
Built in 433.92MHz receiver for remote controls

Download the ‘Smart Life’ App by searching in the mobile App stores or scanning the following QR codes.
Create an account in the App, or if you already have an account just login.
Supply power to the WiFi switch and wire the relay output to the device you are controlling.
Wiring examples
Light: Set mode to latching
Gate: Set output to inching mode – 2 secs Refer to gate panel manual for Start terminals
Power on the device.
Reset the device by pressing the match button for 5 seconds until the red network LED indicator is flashing quickly every 0.5 seconds (if the network indicator is already flashing quickly, skip this step).
Add & connect the device in the App
Name the device.
When the network is disconnected, the switch will automatically change to Bluetooth control from the phone. (Must be within range).
Click the On/Off button on the App to switch the relay and control the device.

Quantek-CPWIFISW1-Smart-WI-FI-Switch-08

Set the following:
- Countdown (delay before the output activates)
- Weekly schedules (up to 8 per device)
- Circulate (set the device to switch on and off on a loop)
- Random Inching (set the output timed) Set to 2 seconds when connecting to a gate, door, garage, etc.
Set the following:
- Relay status (when the device is switched back on after losing power) RF remote control setup
- Tap Add
- When prompted, press the remote control button you want to add within 10 seconds The message ‘Add Success’ will be displayed
- To delete a remote control, swipe it to the left and tap delete
Edit device name & location.
- Manage third party control, setup Alexa etc.
- Share device with other users.
- Create a group to control more than one device by a single tap.

Share device with other users

Other users must have a Smart Life account Quantek-CPWIFISW1-Smart-WI-FI-
Switch-10

Enter the email or phone number of the account you want to share with and click ‘Done’
Tap on the name of the account you have shared with
Then you can set a validity period (if required) or unshare the device
Create smart scenes and setup Siri
Tap ‘Scene’ then ‘+’ or ‘Create Scene’
Tap ‘Launch Tap-to-Run’
Tap ‘+’
Tap ‘Run the Device’
Select the appropriate switch
Select the name of switch again, select ‘ON’ and then tap ‘Save’ followed by ‘Next’
Tap the 3 dots to rename the scene then tap ‘Save’
Tap ‘Add to Siri’
Select the scene
Tap ‘Change Voice Phrase’ and enter the desired phrase
Tap ‘Done’
Please note, to use with Siri on other phones, you must share the ‘Home’ with other accounts, rather than just the device.
Tap ‘Me’ > ‘Home Management’ > Select the name of the Home > ‘Add Member’
Please also make sure that the ‘Shortcuts’ App is downloaded on the phone.

Link Alexa and Smart Life Apps. You may need to login to Amazon/Alexa . Quantek-CPWIFISW1-Smart-WI-FI-Switch-15

Please note this feature is a Beta service and requires location services to be on all the time.

Tap ‘Scene’ then ‘+’ or ‘Create Scene’
Tap ‘When location changes’.
Tap ‘Arrive’.
Select location. Zoom in or out to adjust activation radius. Tap ‘OK’.
Tap ‘+’
Tap ‘Run the Device’
Select the appropriate switch
Select the name of switch again, select ‘ON’ and then tap ‘Save’ followed by ‘Next’
Tap the 3 dots
Rename the scene and choose the effective period (if required)
Choose and tap ‘Next’
Tap ‘Save’