Nero 7434101 Soundbox Bluetooth Alarm Clock Radio Instruction Manual

June 6, 2024
Nero

7434101
Soundbox Bluetooth Alarm Clock Radio

Images in this manual are for illustrative purposes only. Due to constant improvements, we advise that changes to the design, material, specifications, and product configuration may occur at any time without notice.

TIPS / IMPORTANT:

All safety and operation instructions should be read thoroughly before proceeding and please keep the handbook for future reference.

IMPORTANT SAFETY INSTRUCTIONS

  1. Read these instructions.

  2. Keep these instructions

  3. Heed all warnings.

  4. Follow all instructions

  5. Do not use this apparatus near water

  6. Cleaning-Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning

  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

  10. Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles, and the point where they exit from the apparatus.

  11. Only use attachments/accessories specified by the manufacturer.

  12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

  13. Unplug this apparatus during lightning storms or when unused for long periods of time.

  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

  15. Do not overload the wall outlet. Use only power source as indicated.

  16. Use replacement parts as specified by the manufacturer.

  17. The product may be mounted to a wall only if recommended by the manufacturer.

  18. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.

  19. Product Features
    (1) Elegant and fashionable design; a simple setting
    (2) Built-in Bluetooth
    (3) 3.2 inch LCD display screen
    (4) FM Radio
    (5) 4 level dimmable
    (6) Stereo speaker, providing superior quality sound
    (7) USB port allows for traditional USB Charging for most devices on the market
    (8) Alarm clock and Snooze function

  20. What is included
    Open 7434101’s box, and you will find
    7434101 Body Unit 1 PC
    User Manual 1 PC
    Power Adaptor 1 PC

  21. Specification Parameters
    – Bluetooth Version: 4.0+EDR
    – Bluetooth Profiles: A2DP, AVRCP, HFP, HSP
    – Receive range: Up to 10 meters
    – Output Power: 3W + 3W – Driver Unit: 4 3W 1.6in
    – Frequency range: 40Hz-20KHz
    – S/N Ratio: >65dB
    – Distortion Rate: <1%
    – FM Frequency Range: 87.5 ~ 108MHz
    – Product Net Weight: 0.59kg
    – Product Size: 13813872mm

  22. Diagram of the LCD Display & the Buttons

Button

|

Function

---|---
| Volume up
| Volume down
| Bluetooth
| Micro SD

**FM**

| FM Radio

**SLEEP**

| SNOOZE 90-80-70-60-50-40-30-20-10-OFF Minute
| Pause/Auto Scan FM Station
| Time Setting of Alarm
| Skip Forwards next Song
| Skip Backwards last Song

**SNOOZE|DIMMER**

| SNOOZE, Display Brightness Level (4Levels: 1-2-3-4)

Product Features

5.1 Set Time
Under any mode, press “Time” to set the time. Press “+” or “-” to switch the Hour mode between 12-Hour and 24-Hour. Press “Time” to confirm it. Then Hour figure minute figure begins to flash. Press “+” or “-” to adjust the HOUR and press “Time” to confirm it, then press “+” or “-” to adjust the MINUTE and press “Time” to confirm the setting. It will confirm and exit the setting in 5 seconds if no operation on any key.

5.2 Set Alarm Time
Under any mode, press and hold for 2s to enter alarm time setting, icon displays on the LCD. Press “+” or “-” to adjust the alarm time, press to confirm. It will confirm and exit the setting in 5 seconds if no operation on any key.

5.3 Set Daylight Saving Mode
Press and hold “Time” to switch to Daylight Saving Mode. Press and hold “Time” again to switch to standard time.

Play Music from Mobile via Bluetooth

6.1 Operation
Press to put Bluetooth on, on the LCD display start flashing, turn on Bluetooth on your mobile phone and search Bluetooth devices. Connect to Soundbox Bluetooth Alarm  Clock Radio. When it is successfully paired, you will hear the sound of “DU” and it will now start playing music from your mobile.

6.2 Play Music
When playing music, press to pause the music. Press to skip backward last song, press to skip forwards next song.

FM Radio Operation

Press to put FM radio on, press and hold to the auto scan radio station and store the scanned stations accordingly. The frequency starts from 87.5MHz to 108MHz and skips at every 0.1 MHz in the scanning process. Once catching a station, it stops a second and store it, then continues the auto-scanning. When it scans from 87.5MHz to 108MHz or stores 20 stations, it will stop scanning automatically. Press “+” or “-” to select the station.

Play Music from Micro SD

Insert a micro SD card into the Micro SD card jack, press , and start playing music.

SLEEP Function under On Mode

Press to set timing shutdown time from 90-80-70……OFF. Choose the time, it will store it automatically in 3 seconds and exit the setting. To see the remaining sleep time, press.

Back-up Button Battery

The 3V button battery is to retain the alarm/clock in case of a power failure. It can not display the alarm/clock time.

Smart charging function

Dual USB ports can charge any device by USB cable.

Infrared remote control(Option)

Install the battery: Unscrew the back cover of the remote control, open the screws, install 3 pieces of AAA battery, lock the screw and screw the back cover. Sync time with phone:  Unscrew the back cover of the remote control, connect the remote control’s lightning connector to the iPhone interface. In this way, the time will be synced with iPhone. Sync time with the remote control: Align the remote control with the alarm screen, press the sync button on the remote control, the time of the remote control will be transmitted to the alarm clock and turn off the alarm, reset the alarm.

Backed by the Nero 1 Year Warranty
Imported By R. Weatherdon & Co Pty Ltd
www.weatherdon.com.au
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals