CLAS OM2034 Pair Mechanical Dollies Instruction Manual

CLAS OM2034 Pair Mechanical Dollies

Product Information

Specifications:

• Product Name: Pair of Mechanical Dollies
• Model Number: OM 2034
• Capacity: 1180kg
• Manufacturer: CLAS Equipment
• Country of Origin: France

Product Usage Instructions:

Setup:

1. Refer to the exploded view drawing in the manual to identify parts.
2. Assemble the front wheel and rear wheel to the Active Axle with the nut.
3. Assemble the front wheel and rear wheel to the Axle with the nut.

Operating Instructions:
This is the safety alert symbol used for the operating instructions section of this manual to alert you to potential personal injury hazards. Obey all instructions to avoid possible injury and/or property damage.

Frequently Asked Questions (FAQ)

• Q: What should I do if I encounter any issues with the product?
  A: If you encounter any problems, please contact your authorized technician for assistance. For component replacements or parts, please reach out to the reseller.

• Q: How do I return the product?
  A: Before returning the product for any reason, such as installation problems or manufacturing defects, please contact the manufacturer at sav@clas.com or by phone at +33(0)4 79 72 69 18. If you wish to return the product due to a change of mind, please do so before attempting installation.

WARNING

• Before returning this product for any reason (installation problem, instructions for use, breakdown, manufacturing problem…), please contact us.
  Contact:

• You can reach us by mail sav@clas.com or by phone at +33(0)4 79 72 69 18 or go directly to our website clas.com

• If you have changed your mind regarding your purchase, please return this product before you attempt to install it.

SAFETY WARNINGS

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

WARNING: Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING.
BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, AND UNDERSTAND ITS OPERATING PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.

THE NATURE OF HAZARDOUS SITUATIONS

WARNING The use of car dollies is subject to certain hazards that cannot be prevented by mechanical means, but only by the exercise of intelligence, care, and common sense. It is essential to have personnel involved in the use and operation of the device who are careful, competent, trained, and qualified in the safe operation of the device and its proper use when servicing motor vehicles and their components. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly securing loads, overloading, off-centred loads, use on other than hard-level surfaces, and using equipment for a purpose for which it was not intended.

METHODS TO AVOID HAZARDOUS SITUATIONS FOR CAR DOLLY

WARNING

• Read, study, understand and follow all instructions before operating this device.
• Use of this product is limited to transporting only.
• Dollies must be used in pairs. Dollies are to be used to support vehicles. Do not use to support vehicles without wheels.
• Inspect the dolly before each use. Do not use if damaged, altered, modified, in poor condition, leaking hydraulic fluid, or unstable due to loose or missing hardware or parts. Make corrections before using.
• Do not exceed rated capacity.
• Use only on hard, level, dry concrete surface free from expansion joints and all obstructions.
• Do not use with tires that are wider than 12.8».
• Before moving the vehicle, ensure that the vehicle wheels are centered and secure.
• Do not start the vehicle’s engine or drive the vehicle when mounted on dollies. The dolly is designed for manually moving the vehicle.
• Activate the caster locking devices after moving a vehicle.
• Do not use (or modify) this product for any other purpose than that for which it was designed without consulting the manufacturer’s authorized representative.
• Never work on, around, or under a vehicle supported by car dollies.
• Failure to heed these warnings may result in serious or fatal personal injury and/or property damage.

SETUP

PLEASE REFER TO THE EXPLODED VIEW DRAWING IN THIS MANUAL TO IDENTIFY PARTS.

1. Assemble front wheel(7) and rear wheel (28) to Active Axle (27) with nut(5).
2. Assemble front wheel(7) and rear wheel (28) to Axle (6) with nut(5).

OPERATING INSTRUCTIONS

This is the safety alert symbol used for the OPERATING INSTRUCTIONS section of this manual to alert you to potential personal injury hazards. Obey all instructions to avoid possible injury and/or property damage.

1. Make sure the vehicle is on a hard, flat, dry surface and the transmission is in PARK or engaged in gear if a manual transmission before using the dollies.
2. Release the #12 pedal assembly from the #6 axle by pushing down on the pedal end of the assembly with one hand and rotating the #10 latch out of the rectangular hole in the top of the #12 pedal assembly with the other hand.
3. Spread the base leg assemblies far enough apart that they will straddle the tire.
4. Push the dolly in toward the tire where the rollers of the base leg assemblies are straddling the tire and the center of the tire is in line with the center of each roller.
5. Rotate the #16 latch in the opposite direction so the #22 front claw engages the teeth in the #27 inner tube.
6. Activate the #12 pedal assembly so the rollers on the base leg assemblies make contact with the circumference of the tire. Again, make sure the tire is properly aligned with the dolly. Continue activating the pedal assembly until the tire is lifted about 1’ off the ground.
7. Repeat steps 1 through 6 on the remaining three tires. Check to see if the 1’ clearance will be enough to maneuver the vehicle over the floor without any obstructions. It may be necessary to increase the 1’ ground clearance.
8. Once the vehicle is supported by the dollies, move the vehicle slowly and carefully to its destination and engage the locking caster wheels on all four dollies.
9. Removing the vehicle from the dolly will require disengaging the caster locks.
10. Rotate the #15 latch forward towards the foot pedal and then continue to activate the foot pedal until the rollers of the base leg assemblies clear the circumference of the tire. Remove the dolly from under the vehicle.

PARTS

CLAS EQUIPEMENTS – SAS au capital de 130 000€, R.C.S Chambéry: 409 786 944, N° TVA Intracommunautaire FR 13 409 786 944
Siège social, Z.A de la Crouza – 73800 CHIGNIN – FRANCE 44 +33 (0) 4 79 72 62 22 – 4 +33 (0) 4 79 72 52 86
contact@clas.com – www.clas.com

CLAS Equipements
83 chemin de la CROUZA
73800 CHIGNIN
FRANCE
Tél. +33 (0)4 79 72 62 22
Fax. +33 (0)4 79 72 52 86

PAIR OF MECHANICAL DOLLIES 1180kg
If you need components or parts, please contact the reseller.
In case of problems, please contact your authorized technician.

References

• Accueil | CLAS© | Equipements & outillage | Garage solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>