CLAS CH 0001 3Kw Electrical Heater User Manual

: June 12, 2024
: CLAS

Table of Contents

CLAS CH 0001 3Kw Electrical Heater
SPECIFICATIONS DATA PLATE
SPECIFICATIONS
ASSEMBLY
DESCRIPTION
ELECTRICAL DIAGRAMS
INTRODUCTION
OPERATION
SWITCHING OFF AND STORAGE
MAINTENANCE
TROUBLESHOUTING AND REPAIR
Read User Manual Online (PDF format)
Download This Manual (PDF format)
+33 (0)4 79 72 52 86

CLAS CH 0001 3Kw Electrical Heater

WARNING

Before returning this product for any reason (installation problem, instructions for use, breakdown, manufacturing problem…), please contact us. Contact : You can reach us by mail sav@clas.com or by phone +33(0)4 79 72 69 18 or go directly to our website clas.com If you have changed your mind regarding your purchase, please return this product before you attempt to install it.

SPECIFICATIONS DATA PLATE

CLAS-CH-0001-3Kw-Electric-Heater-FIG-1

SPECIFICATIONS

Model

|

kW

| Heating capacity kCal/h|

BTU/h

|

Eﬃciency

| Air ﬂox intake m ³ /h
---|---|---|---|---|---

CH 0001

|

2 – 3

|

1720 – 2580

|

6811 – 10216

|

100

|

300

CH 0002

|

6 – 9

|

5160 – 7740

|

20433 – 30650

|

100

|

650

CH 0003

|

10 – 15

|

8600 – 12900

|

34056 – 51084

|

100

|

950

CH 0004

|

12 – 18

|

10320 – 15480

|

40867 – 61300

|

100

|

1500

Model

| Power supply ph-volt/ Hz|

T °C

|

N° rpm

|

Noise dB(A)

---|---|---|---|---

CH 0001

|

1-230/50

|

30

|

1400

|

45

CH 0002

|

3-400/50

|

35

|

1400

|

50

CH 0003

|

3-400/50

|

40

|

1400

|

52

CH 0004

|

3-400/50

|

45

|

1400

|

54

ASSEMBLY

Attach the stand using the screws provided

DESCRIPTION

CLAS-CH-0001-3Kw-Electric-Heater-FIG-3 CLAS-
CH-0001-3Kw-Electric-Heater-FIG-4

Electrical cable
Handle
Temperatur sensor
Motor
Fan
Element
Autotransformer
Selector
Limiter thermostat
Thermostat
Contactor

ELECTRICAL DIAGRAMS

CLAS-CH-0001-3Kw-Electric-Heater-FIG-5

M Motor
R Resistance
ST1 Thermostat
ST2 Limiter thermostat
T1 Contactor
P.M. Motor heat rotection

ELECTRICAL DIAGRAMS (to continued)

CLAS-CH-0001-3Kw-Electric-Heater-FIG-6

M Motor
R – R1 – R2 Resistance
ST1 Thermostat
ST2 Limiter thermostat
ST3 Cooling thermostat
T1 – T2 Contactor
P.M. Motor heat rotection
F Fuse

CLAS-CH-0001-3Kw-Electric-Heater-FIG-7

M Motor
R – R1 – R2 Resistance
ST1 Thermostat
ST2 Limiter thermostat
ST3 Cooling thermostat
T1 – T2 Contactor
P.M. Motor heat rotection
F Fuse

The above symbol, which you will fi nd on the product itself or on the carton, means that this product should not be treated as household waste, but should be taken to a waste disposal center. By disposing of this product properly, you are helping to avoid potential negative consequences for the environment. For more detailed information about recycling this product, please contact your local council or waste disposal service.

INTRODUCTION

Please keep this manual in good condition and store it in an easily accessible place together with the parts catalogue for quick consulting. Furthermore please read it attentively and carefully follow out all described operations before starting use, during use and while carrying out the maintenance of the machine. The manufacturer of the machine is not liable for damage caused to the machine, persons or objects due to the lack of observation of these norms.

WARNING

Never use the machine without reading this instructions manual.
The connection to the elettrical supply must be carried out by a skilled electrician and must respond to the latest IEC rules released on the elettrical connections. If the electrical supply cable is damaged, it must be replaced by the manufacturer or by the manufacturer’s technical assistance service or by a person with similar qualifi cations in order to avoid risks.
Before any cleaning and repairing operations the machine must always be disconnected from the power supply.
Don´t cover the heater since it could then overheat and could cause a fi re.
Never use heater where gasoline, paint thinner, or other highly ﬂ ammable vapors are present.Follow all local ordinances and codes when using heater. Use only in places free of ﬂ ammable vapors or high dust content. Use only a three-prong, grounded extension cord. Keep children and animals away from heater. Unplung heater when not in use. Never block air inlet (rear) or air outlet (front) of heater. The appliance must not be positioned directly under an electrical power outlet. Do not use this heating appliance in the vicinity of a bath tub, shower or swimming pool.

OPERATION

Use
This is a movable appliance and has been designed for heating closed environments as well as humid, wet environments such as work sites, warehouses, shops and houses.

Setup
Ensure that the electrical characteristics of the power outlet correspond to the diagrams quoted in this manual. To ensure correct installation, check the technical specification plate. Installation may only be carried by suitably skilled personnel in accordance with current legislation.

Standard operation
Turning the knob on the selector (n°8 of the Fig.1 – 3) the following occurs:

0 OFF
1 Fan
2 Fan + ½ Output
3 Fan + Max output

Ventilation operation and ventilation/heating operation are controlled by the thermostat

Fan mode operation
When the switch (n°11 of the Fig.2) is in “0” position and turning the knob on the selector (n°8 of the Fig.2) the following occurs:

0 OFF
1 Fan
2 Fan + ½ Output
3 Fan + Max output

Ventilation operation and ventilation/heating operation are controlled by the thermostat (n°10 of the Fig.2). The fan continues to operate when the adjustment thermostat is activated. When the switch (n°11 of the fig.2) is in “0” position the fan is controlled by the cooling thermostat ST3. The fan starts when the resistance is hot and stops when it’s cold.

SWITCHING OFF AND STORAGE

Set the termostat to position “0”.
Turn the selector to OFF.
Disconnect electrical power.
Wind the cable.

SAFETY AND PROTECTION DEVICES
Limiter thermostat (n°9 of the Fig.1 – 2 – 3). This cuts off the electric power supply in the event of overheating. If the temperature limiter has tripped, let the heater cool down and attend to the fault.

MAINTENANCE

Maintenance may only be carried out by suitably skilled personnel. Clean the heater at regular intervals, since dust and dirt may give rise to overheating and the consequent risk of fire.

TROUBLESHOUTING AND REPAIR

Anomalies	Causes	Repair
The radiator works but does not heat	•The resistance has burned out

• The control thermostat is out of order

| • Replace the heater

• Replace the thermostat

The radiator does not work

| • The thermostat safety device has activated

• The plugs are unplugged

| • Let the heater cool down

• Check the connections

The radiator blows little air

| • The air intake is blocked

•The engine is running above its capacity

| • Clear the air passage

• Replace the motor

EC DECLARATION OF CONFIRMITY
We, CLAS EQUIPEMENTS 73800 Chignin – France DECLARE THAT, Under our responsibility, the following products: Model : CHAUFFAGE ELECTRIQUE 3kw / ELECTRICAL HEATER 3kw Type : CH 0001 Is manufactured in conformity with the European directives 2006/42/EC, 2006/95/ EC, 2004/108/EC et 2000/14/EC following standard :

EN 60204-1

Chignin le 20.09.2022 Benoît DUPuIs, responsable technique

CLAS EQUIPEMENTS

EC DECLARATION OF CONFIRMITY

Nous, We,

DECLARE THAT, Under our responsibility, the following products: Model : CHAUFFAGE ELECTRIQUE 9kw / ELECTRICAL HEATER 9k Type : CH 0002 Is manufactured in conformity with the European directives 2006/42/CE, 2006/95/CE, 2004/108/CE et 2000/14/CE following standard :

EN 60204-1

CLAS EQUIPEMENTS

+33 (0)4 79 72 62 22 –
+33 (0)4 79 72 52 86
contact@clas.com
www.clas.com

EC DECLARATION OF CONFIRMITY

Nous, We,
DECLARE THAT, Under our responsibility, the following products: Model : CHAUFFAGE ELECTRIQUE 15kw / ELECTRICAL HEATER 15kw Type : CH 0003 Is manufactured in conformity with the European directives 2006/42/EC, 2006/95/EC, 2004/108/EC et 2000/14/EC following standard :

EN 60204-1

CLAS EQUIPEMENTS

+33 (0)4 79 72 62 22
+33 (0)4 79 72 52 86
contact@clas.com
www.clos.com

EC DECLARATION OF CONFIRMITY

Nous, We,
DECLARE THAT, Under our responsibility, the following products: Model : CHAUFFAGE ELECTRIQUE 18kw / ELECTRICAL HEATER 18kw Type: CH 0004 Is manufactured in conformity with the European directives 2006/42/EC, 2006/95/EC, 2004/108/EC et 2000/14/EC following standard :