Newell S18 Car Mount with MagSafe Inductive Charger Instruction Manual

Newell S18 Car Mount with MagSafe Inductive Charger Instruction Manual

SAFETY INSTRUCTIONS

Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.

The LED light turns red during wireless charging to indicate a charging failure.

The following situation can cause failures, like charging slowly, stop charging, over-temperature for charging position:

1. The adapter is not run up to standard (No PC USB output power supply).
2. The charging cabie is not up to standard.
3. The phone case is too thick (within 2mm thickness phone case recommended).
4. The built-in wireless charging receiver position is not coincided with wireless charger coil position.
5. There is metal/magnet on the back of cell phone or phone case.
6. Smartphone does not support wireless charging function

PRODUCT DESTRIPTION

Inductive charging area / Mag Safe
Type-C port
Heat dissipation
Handle direction adjustment knob
Vent grille attachment
Vent grille clip adjustment

INSTALLATION OF THE CHARGER IN THE VENT

1. Connect the charger to the holder
   

2. Adjust the screw cap to the best active status.

3. Turn the pulley to the left to adjust the hook to the longest
   

4. Rotate the pulley to the right to make the hooks to clamp the air vent blades
   
   

5. Installation completed.
   

CHARGER POWER SUPPLY

Connect the charger to the port at the bottom of the charger using a USB-C cable

Note!
For safe and efficient charging of smartphones, use a 9V/2A adapter (Qualcomm Quick Charger 2.0 or 3.0) and a fast charging cable.
(If the correct adapter and fast charging cable are not used, the charger may not charge the phone, charge with less power, or may damage the charger).

LED INDICATOR

There is an LED light on the side of the product:

• White LED light: Standby mode
• Blue LED light : Charging process
• Red LED light: Charging abnormally
  

CHARGING

• ✓ Non-case

• ✓Apple Mag Safe case

• ✓ Other Mag Safe case

• × Thick case

• × Normal case

• × Metal

RING FOR QI SMARTPHONES

Included is a magnetic ring for smartphones that have inductive charging and do not have Mag Safe.
To use the holder, stick the ring to the back case of your smartphone.

Note!
Before gluing the ring, make sure you choose the right place Sticking the ring to the case in the wrong place may cause charging problems, including overheating of the smartphone.

SPECIFICATION

PRECAUTIONS

Please keep the charger away from water or other liquid.
If you need to clean the charger, please make
sure it is not connected to power supply. Operating temperature: -20°C – 45°C

WASTE MANAGEMENT

The crossed-out trashcan symbol means that waste electrical and electronic equipment, batteries and packaging’s must not be placed with other household waste. They must be handed over to a separate waste collection system.

WARRANTY

Newell products are covered by a 40-month manufacturer’s warranty.

“The manufacturer reserves the right to change the information contained in this manual without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>