EKTON 4 Series 44 mm Smartwatch User Guide
- June 3, 2024
- EKTON
Table of Contents
4 Series 44 mm Smartwatch
User Guide
How to Quick Setup your EKTON Smart Watch
1. Remove the protective plastics from your smart watch and wireless charger.
2. Turn on your smart watch by pressing the round button for approximately 3
seconds. If smartwatch not turn on, then need to charge this. Go to step 11.
3. To turn it off also press the round button for 3 seconds and select the
icon to turn it off.
4. Turn on the Bluetooth of your smartphone
5. Download the WearPro app in your smartphone (you can scan the QR code in
user manual or search WearPro in App Store)
http://dt1pro.cn/app-download/wearpro/index.html
6. Open WEAR PRO app then select Device icon at bottom, then select Bind
device named Smart Watch
10. To connect Bluetooth Calls and Audio on the Smart
Watch:
11. If
the Smart watch does not turn on in step 2 above, it may need charging 12.
Wireless Charging instructions:
- Plug in the wireless charger to an USB port in your laptop or Normal USB charger (not provided).
- Recommend charging the smart watch with a 5V 2A charger.
- Place the back of the smart watch on the magnetic face of the wireless charger
- Charging the watch may take 2-3 hours when it is at 0%
13. Configure App notifications:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>