milwaukee M18 High Torque Impact Wrench Instruction Manual

: May 15, 2024
: Milwaukee

Table of Contents

milwaukee M18 High Torque Impact Wrench
Product Information
Product Usage Instructions
Frequently Asked Questions
TECHNICAL DATA
SAFETY INSTRUCTIONS BATTERY
SPECIFIED CONDITIONS OF USE
NOTES FOR LI-ION BATTERIES
USB PORT
MAINTENANCE
SYMBOLS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

milwaukee M18 High Torque Impact Wrench

milwaukee-M18-High-Torque-Impact-Wrench-PRODUCT

Product Information

Specifications

Model: M12 LL, M18 LL
Power Source: Battery pack
Usage: Electronic tools
Safety: Remove battery pack before starting any work

`Product Usage Instructions`

Important Safety Precautions

Before using the machine, ensure to follow these safety precautions:

Always remove the battery pack before starting any work on the machine.
Check the power cord and plug for any damages before use.
Repairs should only be carried out by qualified personnel.

Operating Instructions

Ensure the battery pack is fully charged before use.
Insert the battery pack into the machine securely.
Press the power button to turn on the machine.
Follow the specific instructions for the tool you are using.

Maintenance

Proper maintenance of the machine is essential for its longevity. Follow these maintenance tips:

Clean the machine after each use to prevent dust buildup.
Store the machine in a dry and cool place when not in use.
Regularly check for any signs of wear and tear and replace parts as needed.

Frequently Asked Questions

Q: Can I use the machine without the battery pack?
- A: No, it is not recommended to use the machine without the battery pack as it may lead to damage or malfunction.
Q: How do I know when the battery pack needs recharging?
- A: The machine may show reduced performance or stop working altogether when the battery pack needs recharging.

$milwaukee-M18-High-Torque-Impact-Wrench-FIG $1$$

Remove the battery pack before starting any work on the machine. $milwaukee-M18-High-Torque-Impact-Wrench-FIG $3$$ $milwaukee-M18-High-Torque-Impact-Wrench-FIG $6$$ $milwaukee-M18-High-Torque-Impact-Wrench-FIG $7$...$

TECHNICAL DATA

$milwaukee-M18-High-Torque-Impact-Wrench-FIG $8$$ **

**

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS BATTERY-LAMP

Warning: Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vision loss.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Don‘t use this tool in wet areas.

SAFETY INSTRUCTIONS BATTERY

Remove the battery pack before starting any work on the appliance.
Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors offer to retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects (short circuit risk).
Use only compatible Milwaukee chargers from the same battery platform for charging battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it off immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.
Warning! To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., can cause a short circuit.

SPECIFIED CONDITIONS OF USE

The battery lamp can be used as lighting independently of a mains power supply.
Do not use this product in any other way as stated for normal use.

NOTES FOR LI-ION BATTERIES

Use of Li-Ion batteries Batteries which have not been used for some time should be recharged before use. Temperatures in excess of 50°C (122°F) reduce the performance of the battery. Avoid extended exposure to heat or sunshine (risk of overheating). The contacts of chargers and batteries must be kept clean. For an optimum life-time, the batteries have to be fully charged, after used. To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged. For battery storage longer than 30 days: Store the battery where the temperature is below 27°C and away from moisture Store the battery in a 30% – 50% charged condition Every six months of storage, charge the battery as normal.

Transport of Li-Ion batteries

Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. Transportation of those batteries has to be done in accordance with local, national and international provisions and regulations.

The user can transport the batteries by road without further requirements.
Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.

When transporting batteries:

Ensure that battery contact terminals are protected and insulated to prevent short circuit.
Ensure that battery pack is secured against movement within packaging.
Do not transport batteries that are cracked or leak. Check with forwarding company for further advice.

USB PORT

Devices connected to the USB port are supplied with power. Any device that uses more than 2,1 A of DC electrical current will trip a self-resetting function and disable the output.

MAINTENANCE

Use only Milwaukee accessories and Milwaukee spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses). If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the six-digit No. on the label and order the drawing at your local service agents or directly at: Techtronic Industries GmbH, Max‑Eyth‑Straße 10, 71364 Winnenden, Germany.