StarTech com HB30A10AME Industrial USB 3.0 Hub with 15KV ESD Protection Installation Guide

StarTech com HB30A10AME Industrial USB 3.0 Hub with 15KV ESD Protection

Product Specifications

• Model: Industrial USB 3.0 Hub with 15KV ESD Protection
• Power Requirement: 9-24 VDC external power source
• Protection: 15KV ESD Protection
• Compatibility: Windows 10/8/7/Vista/XP, Server 2003 & 2008, Server 2008 R2

Product Usage Instructions

Powering the Hub
The Industrial USB 3.0 Hub with 15KV ESD Protection requires a 9-24 VDC external power source to function. You can power up the hub using either the DC Power Jack or the 3-Pin Terminal Block.

DC Power Jack

1. Plug the power adapter into a reliable power source.
2. Connect the power adapter to the hub’s DC Power Jack. (Power adapter not included)

3-Pin Terminal Block

1. Plug the included terminal block into the hub’s terminal block connector.
2. Refer to Pin Assignment for wiring details. (Power adapter not included)

Hardware Installation
You can mount the hub on the wall or DIN-Rail as needed.

DIN-Rail Mounting

1. Use the included screws to install the DIN-Rail kit to the hub.
2. Insert the top of the DIN-Rail clip onto the DIN-Rail track and push the bottom of the hub to secure it. See Figure 8 for reference.

Wall Mount Plate Mounting
Use the provided Wall Mount Plate to mount the hub on the wall. See Figure 9 for reference.

Frequently Asked Questions (FAQ)

1. Q: What operating systems are compatible with this USB hub?
   A: The USB hub is compatible with Windows 10/8/7/Vista/XP, Server 2003 & 2008, and Server 2008 R2.

2. Q: What power source does the Industrial USB 3.0 Hub require?
   A: The hub requires a 9-24 VDC external power source to function properly.

Introduction
The Industrial USB 3.0 Hub with 15KV ESD Protection is built with high quality components and different levels of protection to withstand harsh industrial environments.

Features and Benefits

• Compliant with Universal Serial Bus 3.0 Specification
• Industrial  grade  rugged  metal  housing  enclosure design
• Redundant 9 to 24VDC power input
• 15KV ESD USB interface protection
• Power input surge protection (600W) for each port
• Over‐current detection and protection circuit design
• Wall and DIN rail mount support

System Requirements

• Desktop  or  notebook  with  an  available  USB port (USB 3.0 is recommended)
• Windows®  10  (32‐/64‐bit)   /8  (32‐/64‐bit)   / 7  (32‐ /64‐bit) / Vista (32‐/64‐bit) / XP (32‐/64‐bit) /Server 2003 & 2008 (32‐/64‐bit) / Server 2008 R2

Package Contents

• Industrial USB 3.0 Hub with 15KV ESD Protection
• USB 3.0 type A to B cable (2 meters)
• DIN‐Rail and wall mount kit
• Terminal block
• Quick installation guide

Powering the Hub
The  Industrial  USB  3.0  Hub  with  15KV  ESD  Protection  requires a 9‐24 VDC external power source (not included) to work.  Power up the Industrial Hub through either the  DC Power Jack or 3‐Pin Terminal Block.

DC Power Jack
Plug the power adapter into a reliable power source, then connect it to the hubʹs DC Power Jack. (Power adapter not included)

Figure 3 DC In

Refer to the Table below for the specifications of the DC power adapter.

Outside| Inside| Plug| Negative / Positive
Center pin for positive voltage and the outer shield for negative voltage
---|---|---|---
diameter| diameter| length
(OD)| (ID)| (L)
5.5+/‐0.05
(mm)| 2.1+/‐0.05
(mm)| 10+/‐0.3
(mm)

Table 1: Power Adapter Specifications

3-Pin Terminal Block
Plug the included terminal block into the hubʹs terminal block connector . See Figure 4.

Figure 4: Power Terminal
Refer to Pin Assignment in the next section for wiring the power adapter (power adapter not included).

Pin Assignment

Figure 5

USB Type B Upstream Port

Figure 6

Hardware Installation

Mount your hub on the wall or DIN‐Rail, if needed.

DIN-Rail Mounting

1. Use the included screws to install the DIN‐Rail kit to the hub. Figure 7
2. Insert the top of the DIN‐Rail clip onto the DIN‐Rail track,  then  gently  push  the  bottom  of  the  hub  to secure it to the DIN‐Rail track. See Figure 8 . Figure 8

Wall Mount Plate Mounting
Use the provided Wall Mount Plate to mount the hub to the wall. See Figure 9.

Figure 9

Documents / Resources

| StarTech com HB30A10AME Industrial USB 3.0 Hub with 15KV ESD Protection [pdf] Installation Guide
HB30A10AME Industrial USB 3.0 Hub with 15KV ESD Protection, HB30A10AME, Industrial USB 3.0 Hub with 15KV ESD Protection, Hub with 15KV ESD Protection, ESD Protection
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>